Enhance Power Connectivity and Charging for HD PRO & Micro USB Dash Cameras with the Left Angle Micro USB Hardwire Kit Review

Works great. This is the angle I need to connect the dash cam and easily hide the cable. The length should be enough for almost any vehicle, and the included fuse and safety cock is an added bonus.

I used this to replace another much more expensive model that had a broken connector. I was concerned about the quality given the lower price. Build quality seems to match the lower price but has been working without issues for the last month so far. If that fails I will update this review accordingly. The cable length on the video output side is shorter than the other model I used. The wires on the power/ground side are much longer, so there was just enough length in my Wrangler to reach the…

I tried to use this product to support wired installation of 70mai Pro Dash Cam (Model: Midrive D01) with connected GPS/ADAS module. The connector is correct - micro-USB. The "90° left connector" causes the cable to run down in relation to the camera body. The output voltage is 5 V. It's all good, however. The output current of the adapter is only 1.5 amps. Shameful. 2.0 amps is the required minimum for modern electronics. And this 2 A needs this dash cam (according to 70mai specification). As…

The kit works and does what it's supposed to do: charge the DVR. As others have pointed out, there are no guidelines. OK. If you only use one fuse you will need a multi tester to find out which slot to put the fuse in as there are no instructions. Also, you can clearly see in the picture that the fuse box end of the kit has a bullet connector on the end of the cable, but the USB end is not connected. Since the connector is not included, you will either need to purchase a connector and crimp the