💡 EverBrightt 6-Pack Cool White 5730 9SMD LED Panel Dome Light: Ultra-Bright Car Interior Lighting with T10, BA9S, Festoon Adapters Review

I want to give them more. I do. They are insanely bright. It seems too bright. But the quality matches the price, and over time I got bad LEDs. Now a panel is just dead and a lot of people are or are dead. They also had to include double sided tape and protect the pins on the back of the panel. For $10 or so. They work. And intense. But there is no durability here

LEDs work as advertised and are very bright. I installed them on my RAM 3500 internal light card and it takes my eyes a few minutes to adjust to the dark at night after these baby kicks turn on are! The adapters supplied are cheap, make sure the small wires on the plug are aligned and secured before putting everything back together!

Headlights worked well. I used these to replace OEM LEDs that were flickering in my 2017 RAM 2500 and they worked fine for this application. Not an OEM fit but looks like a mod where I mounted them on top of the lens but under the knob/cap. The problem is that the headlights get very hot and the double stick tape on them (maybe 3M?) didn't cut them as it held the weight of the LED upside down so I now have to open the overhead console again and tape the light panels. .

I installed these LEDs in the cockpit of a Ram 1500. I give them a 5/5 for easy installation, although my installation process was a lot more difficult because I had to cut the connections from the light and solder them to the factory light harness in my truck. The glue is good, I've glued them to the case and they've held up well so far. The interior is black and those lights really help illuminate the truck's cabin. You can tell the difference between factory underfoot lamps with a yellowish…

So I used these LEDs to replace the stock map lights on my 2016 Ram 1500 and I have to say it was a lot easier than I thought. be. The hardest part was getting the map lighting console out of the truck. The stock lights started flickering and so I wanted to replace them without replacing the entire console as it is more expensive and as several people have told me is the only way to fix the problem. Anyhow, I'm happy to report that these lights work beautifully! They are bright and give the…

I used the garland version so this review is based on that alone. Installed in the interior lighting of the map in 07 Avalanche. The diameter of the ends of the garland is slightly smaller than the standard garland version. Consequence of bad contact. The solution is pretty simple. Using needle nose pliers, gently squeeze the metal tabs of the string bushing, but do not punch around the bushing. This will keep the daisy plug adapter firmly in place and prevent flickering from poor contact. The…

So easy to put together, just choose the right adapter and LED strip, then insert the pins in the obvious holes and if they don't press lightly, just rotate it 180 degrees and reinsert the pins and they come together easily and are flush. Then replace the old bulb and remove the tape behind the LED strip and attach as desired. I'm very happy with how bright and comfortable they are to use. SUPER BRIGHT! Good price. I'm swapping trunk and interior lights on a lexus es330 and they fit perfectly…