eXtremeRate Soft Touch Replacement Kit - Foggy Clear Blue Faceplate Cover, Front Housing Shell Case for PS4 Slim Pro Controller JDM-040 JDM-050 JDM-055 - Controller NOT Included Review

First read all the information eXtremeRate has to say about compatible controllers. I didn't do much, but there were still some issues. The bezel cover was for Gen 4 and Gen 5 controllers aka (PS4 Slim Controller and above). I have a Gen 3 controller so obviously it doesn't fit. However, since I've already made some custom controller mods, I've been able to customize them to my liking. I had to cut and trim some plastic pieces. If you read all the information and order the right faceplate for…

Does the job and looks great once installed. The positive aspect of this shell is its easy installation and of course its great looks. The downside is that some of the corners are not cut properly and have burrs on the edges. So I had to remove the sprocket and also the fact that the holes are unthreaded so you can remove the bolts if you're not careful. Edit: After prolonged use, the shell I received doesn't sit flush with the bottom of the controller, so there are sharp edges and squeaky…

Suitable for CUH-ZCT 1U and 2U models. If you don't have them, I recommend watching a disassembly video before installing the plastic tools and adding them to your cart. Also, you need to tighten the included screws at 4 points around the controller before disassembling and reassembling. You didn't drill the holes well enough so use one or two of the 6-8 screws provided so you don't over drill the holes so you can line them up when reassembling. Take the 4 official SONY screws and screw them…