Header banner
Revain logoHome Page
๐Ÿ›๏ธ ezprotekt lift furniture riser - solid steel bed risers, adds 2" height to heavy furniture or beds, self-adhesive furniture chair table riser square (set of 4) - supports up to 20,000 lbs - brown logo

๐Ÿ›๏ธ EZprotekt Lift Furniture Riser - Solid Steel Bed Risers, Adds 2" Height to Heavy Furniture or Beds, Self-Adhesive Furniture Chair Table Riser Square (Set of 4) - Supports up to 20,000 lbs - Brown Review

7

ยท

Average

Revainrating 3 out of 5ย ย 
Ratingย 
3.1
๐Ÿ›๏ธ Bedding Accessories, ๐Ÿ›Œ Bedding

View on AmazonView on ะฏM

Media

(4)
img 1 attached to ๐Ÿ›๏ธ EZprotekt Lift Furniture Riser - Solid Steel Bed Risers, Adds 2" Height to Heavy Furniture or Beds, Self-Adhesive Furniture Chair Table Riser Square (Set of 4) - Supports up to 20,000 lbs - Brown
img 2 attached to ๐Ÿ›๏ธ EZprotekt Lift Furniture Riser - Solid Steel Bed Risers, Adds 2" Height to Heavy Furniture or Beds, Self-Adhesive Furniture Chair Table Riser Square (Set of 4) - Supports up to 20,000 lbs - Brown
img 3 attached to ๐Ÿ›๏ธ EZprotekt Lift Furniture Riser - Solid Steel Bed Risers, Adds 2" Height to Heavy Furniture or Beds, Self-Adhesive Furniture Chair Table Riser Square (Set of 4) - Supports up to 20,000 lbs - Brown
img 4 attached to ๐Ÿ›๏ธ EZprotekt Lift Furniture Riser - Solid Steel Bed Risers, Adds 2" Height to Heavy Furniture or Beds, Self-Adhesive Furniture Chair Table Riser Square (Set of 4) - Supports up to 20,000 lbs - Brown

Description of ๐Ÿ›๏ธ EZprotekt Lift Furniture Riser - Solid Steel Bed Risers, Adds 2" Height to Heavy Furniture or Beds, Self-Adhesive Furniture Chair Table Riser Square (Set of 4) - Supports up to 20,000 lbs - Brown

Furniture Risers elevation up to 2 inches ,per riser lifts over 50,00 Lbs per leg โ€“ Raises beds, couches, armchairs, desks, sofas, and other heavy stationary furniture height 2 inches to assist the sit to stand process and boost ergonomics. Made of solid Carbon steel and the bottom of non-woven fabric Design . Protect floors and carbon steel bed lifts wonโ€™t crack like other risers. Adds additional height and storage space under beds and furniture making cleaning underneath furniture easier especial great for robot vacuums. Easy to use - Self-Adhesive bed risers ,just peel off the back cover of risers and stick on the furniture legs. 4Pack Furniture Risers( Diameter : 2.5 inches,High: 2 inches). 100% crack free warranty from registered brand on amazon. Other risers crack easily in spite of assurances and that has become the highest rated complaint of consumers but Ezprotekt risers offer 100% warranty against cracking and have been tested to hold over 5,000 pounds per leg.

Reviews

Global ratings 7
  • 5
    3
  • 4
    0
  • 3
    1
  • 2
    1
  • 1
    2

Type of review

Revainrating 1 out of 5

Disappointed with the lack of durability.

Poor quality sofa covers. They fail several times a day and break quickly. Two weeks and they are almost completely unusable. The metal begins to bend. Liability is completely gone on three of the four we have. Damn. I will have to buy another type as this one is not strong at all for our sofa.

Pros
  • Decent finish
Cons
  • Volume

Revainrating 5 out of 5

Works best in bedding accessories

These are used on bookshelves to raise them off the floor. This way the vent underneath is not blocked. The one I put in popped out when I pulled it instead of picking it up off the ground. It's not that long ago and the glue hasn't had a chance to fully work. I just reinstalled it and haven't had any problems since.

Pros
  • sequins
Cons
  • expensive

Revainrating 5 out of 5

Perfect little table base

I bought another plastic coaster first but found that all plastic coasters are huge and mostly for the bed and sofa. As for me, I just want to raise my L-shaped table so that this steel frame fits me perfectly. It's sized small so it doesn't look out of place, and it's made of steel to support a lot more weight. You don't have to worry about a smaller table leg either.

Pros
  • Sturdy design
Cons
  • too dull

Revainrating 1 out of 5

Not suitable for tapered wooden legs with metal tips

I liked how they fitted the edge of our loveseat, but they wobbled and we couldn't keep our loveseat from tipping over unless they made contact with the metal rails on the ends of the tapered legs. We think it should be warned that they only fit square legs with no metal guides. It was impossible to adapt, although we tried. Not good for us.

Pros
  • All right!
Cons
  • unreliable

Revainrating 5 out of 5

It is great. for bed risers

I put them under the double bed. I was afraid they would move if I move the bed but they stay in place very well. Make sure you center them exactly where you want them because the moment you put the bed leg back on them they're going nowhere. Excellent glue. A very good buy. And they don't stick out like a sore thumb. I have a brown color and a walnut/oak bed.

Pros
  • Several competitors
Cons
  • Empty

Revainrating 2 out of 5

They were too big for the accent chair

I felt they should be smaller to fit the accent chair legs. They were sold as extensions for chairs or beds. They look stupid when I put them on the back of the chair. It looks like my chair is standing on wooden blocks. I do not want it. I looked for the smallest ones and figured they would work. They would be great for a bed, but not a bare-legged chair. I am sorry.

Pros
  • Complete Set
Cons
  • No Form Required

Revainrating 3 out of 5

Works great, albeit with modifications.

These furniture lifters rely on glue to attach to existing furniture legs. I was wary of relying on the included tape. So instead I drilled holes and bought screws to securely attach each of these metal extensions to the wooden "legs" of our sofa. The modification works great. I'm sure they won't slip and luckily, albeit by accident, they match the wooden "legs" on the sofa perfectly. They offer a comfortable 3 inch elevator. Reluctantly assume they work the same way with the adhesives included

Pros
  • Worth the money
Cons
  • It's ok