🔪 FL!PPER Flipper Max Stainless Steel Replacement Blades - Optimal Glass Tank Maintenance Review

I have no idea why these blades are so thin. They bend easily with normal use and don't stay sharp for long. But when they are new, they work very well.

Strong magnet works very well with 3/4" glass and I expect it will work with 1" glass as well. Easy to roll over and go around corners.

I have had many glass cleaners over the years and can honestly say this is the best I have come across. It's great to be able to switch from pad to scraper without taking the device out of the water! The fins themselves are a bit more expensive, but it's worth it.

I bought this thinking it was the same as the original that comes with a magnet. The magnet is amazing. The blade originally supplied with magnet works perfectly and as intended. I noticed that the edges have a point as the end. They're rounded, I don't know, maybe it's the rounding, but they don't work at all. He didn't even take the seaweed off the side of the glass. The second I put the old blade back on the seaweed, it was gone.

Great solution for deep tanks --- it works half an inch thick glass in the nose tank deeper than the length of my arm. Flipping is a learning curve. First purchase the gauge required for the thickness of your tank glass. Second, be careful not to pinch your fingers between the magnet and scraper. Third, read the instructions. Flipping requires a bit of turning and maneuvering: it's a learning curve, but it WILL flip even if you don't reach into the tank. And the blade removes the sea tank coral

Pinball worked great when first purchased. After about a year of use, I noticed that it's not getting everything it's supposed to. Then I bought these replacement blades. They are in no way difficult to replace and you have to do it blindfolded in the dark during an eclipse to install them incorrectly. However, after I replaced the blade, the scraper was virtually unusable and I have no idea why. I've changed different blades, made sure they're adjusted correctly, but they still haven't…

First off, let me say that I never usually write good reviews. After using this product I have to say it's amazing! I have been in the marine hobby for almost 13 years and have had many aquariums! I used the magnetic floats, the original magnetic cleaner and the Pirranna algae scraper that I currently have. I am very picky and ride bare bottom tanks to avoid scratches. My aquarium also cost about $6,000 which is the equivalent of 560 gallons from Miricles aquariums. I'm very careful not to…