🔌 Garmin 0101107801 NMEA 2000 Multiport T-Connector - Black (Medium) Review

Much better than the 4 separate ports I had before. Takes up less space and reduces the number of connections. Use connectors if you don't need all 4 connectors.

I think it makes it a little neater under the dash then I tease that there is room for two small screws you can screw to the bulkhead, the installation went very neatly

This is a set of four standard NMEA 2000 connectors in an assembly much shorter than the space required for four separate T-tap cable connectors. And it's also significantly cheaper per connection. Highly recommended!

They claim it is Garmin brand but it is not a fake made in China. It's not straight up and down, the guide block is at an odd angle and doesn't fit my actual Garmin connectors! Complete garbage.

I chose this product to avoid multiple T-joints. Save installation space. If you use many nema2000 tees for multiple devices, it will take up a lot of space. This device reduced the footprint and worked great.

This is not a Garmin product. This is a watch that is not positioned on my boat like the Garmin t-shirt so when attached to my spine it cannot lay flat on the screw mounting board. I would say that the new part and old Garmin mated together are tilted 20 degrees making it impossible for the base to sit flat and attach to a flat surface.