🔧 GM Performance Parts 19212593 Oil Pan: Enhance Engine Performance and Efficiency Review

I'm not writing a bad review. Just a warning that it hangs well below the 68 Nova crossbar. This thing is about 7.5 inches deep. You need a pan no deeper than 6 inches. I can't get over speed bumps.

Bought to replace LS with Chevy 57! Fits the stand perfectly. The dipstick tube was damaged and some bolts were missing, order 2 and return one with damaged parts and bolts missing. Bad packaging

Came disassembled, in the box, no instructions, receipt etc. Do not assume the wind deflector is correct as the rounded edge on the passenger side will not sit flat. that is, if I reassemble it correctly, every guide, every picture, everything helps. can you send them to me

This worked great on my 97 S10 5.3 Swap. I also had to cut the frame but it fits perfectly flush with the bottom of the frame. Looks like it belongs in a truck. Also, this is a GM part so it's very well made. Besides, he came with everything. I mean everything, bolts, gasket, pan, dipstick tube, dipstick and even the bolt that attaches to it.

I was very disappointed at first sight. Upon opening the box, the screws were simply thrown into the bottom of the box, the gasket detached from the pan and bent. There is a significant amount of surface rust on the air intake pan and the oil dipstick is also rusty. It just looks like leftover product from a return that has sat on the shelf long enough to rust. feel cheated out of $200.

Good complete kit product but unfortunately does not work, sump matches engine perfectly but bolt pattern on display is not universal. There are 2 types and Holleys have both but they are not included and the price is great. I wish they both had lace patterns. (The lower right F-Body pan has a flared screw to the right of the rear pan screw. This is below and to the left of the screw) :(

Bought for 6.0 I installed my s10 I have to say I had the same problem as everyone else loose bolts and some rust. The quality of the product is pretty good, I have only one problem I'm trying to solve. I measured the distance between the oil pickup and the bottom of the oil pan and it is an inch and a half. Melling recommends 3/8 to 1/2 inch. My machine shop modifies these gauges for 3/8 inch spacing. What approval do standard engines with these oil pans and oil collection containers have?