Grinders Ultras Raver 319000 black 39 size Review

Medium-height boots of the Ultras Raver series in black, with powerful welts and thick soles, launched in 2002, in 2014 the last was updated. Important: the model is assembled on a European block, so it is oversized - for example, the 41st size will actually be 42-42.5. Please take this into account when ordering. Due to the design features of the model, the 35th size is made only with a granitol toe cap, all other sizes with a metal toe cap. As standard, Ultras grinders boots are made of genuine cattle leather, leather fiber at the bottom, a micropore layer and a heavy rubber sole with a tread. The sole is attached to the workpiece by the doppel method, with a double bend of the skin, through a leather welt. These shoes are sewn on the principle of work boots from only 4 parts, each of which can carry a large load. Bertsa medium height, butt connected to the vamp with a triple seam, there are six metal eyelets for lacing. The nose of the model is a separate detail, it is also attached to the vamp with triple stitching. The heel is hot molded from granitol under pressure. The nose of the model can also be molded from granitol, or a metal glass (subsock) is inserted inside. The weight of the glass is about 200 grams. Black genuine leather lining. The insole is lingering, non-removable, in a serial pair over a lingering insole, a lining is glued. Sandwich-type sole: a layer of leather fiber is sewn to the workpiece through the welt, then a 12-mm layer of micropore is glued, then the rubber sole is glued together with the heel, then for reliability all layers are seized with 14 screws. At the finishing stage, all layers are turned on the finisher. The manufacturer reserves the right to make minor changes to the design of the model that do not affect the performance properties.