Heavy Duty Water Filled Patio Umbrella Base | 50LB | Fits 6-9Ft Straight-Pole Garden Umbrella | Steel Pole Weighted Market Design | Outside Pole Holder Review

This stand will be an improvement over my previous 19 pound metal stand. More ballast was needed to keep my tilt umbrella stable in windy conditions.however this stand is advertised to weight 50 lbs when filled with water. I weighed it on a scale when full and the weight capped at 43 lbs, not 50. Think capacity should be revised or stand made bigger.

Base wobbles on ground so umbrella leans in various directions. With a high wind, base rolls and umbrella tips over. Inside of umbrella holder is rusting.

Missing 1.5” C1 spacer in package. Directions need to show part B steel pole must be driven through Base A. The base may take up too much space on a small patio or deck!

Pros: Stable and solidCons: Can't completely drain of water when it's time to put away for the winter. Recommend filling with RV antifreeze and leaving outside.Base tube spins causing umbrella to spin as well. A real problem if you use a tilting umbrella.

Nuts missing missing! Could not put the base together. Need a handyman to help. Later: Got handyman who put it together. Nothing missing but decent instructions!

This is a great product. It adds stability to the patio umbrella and although heavy when filled with water, it can still be moved as needed.

I was concerned about adding water or sand. I added water because that is what I had. It was very stable and sturdy. I am surprised!

Part H was missing from package. Not pictorial on how to use part H. I put stand together without it. Better design would have the pole tightening set screw tighten against a bushing rather than umbrella pole itself. Would make pole more secure and would prevent damage to umbrella pole.

Purchased this to use for my traditional wooden picnic table with a 9 ft umbrella. It's rather large and clunky so it does take up a lot of foot space under the table where a person would sit in the middle. It would definitely work best with a round table imo - because of that. Since we generally don't seat that many people it's just fine for our purposes. It is not fancy - but gets the job done. I filled it with water, screwed on the cap, and stuck the umbrella in it through the hole I drilled

There is no way to keep the umbrella from swivelling around in the base. The whole setup did not seem very stable. The post that supports the umbrella is very short compared to others I have had. I would not recommend for a tilting umbrella as the wind can catch it and move it around which kind of defeats the purpose of having the tilting ability.

What did it for me was the fill hole is the same size as a garden hose, screwed hose in, filled, done! 3minsThe shaft is separate and secured with a plate on the bottom which is nice, if it should break I can make my own replacement!

This was a very practical base and worked great till we saw it leaking and umbrella falling with wind, as there wasn't enough water to keep it stable. Noticed several holes in less than a year and would need a replacement soon. I didnt know it would last this short. Disappointed!

It’s a little bulky but serves it’s purpose. Also my table is really small here so that makes it look extra bulky. Just giving perspective so that everyone knows that it’s definitely not a one size fits all. Check your measurements and order any base based on table style.

Love this umbrella base. BUT 3 items were missing from the package. I'd have been happy to receive the 3 items but there is no way to say this in ebay's system so I opted for replacement. Pick up/delivery were quick but still 1 item missing. Please help me! Don't want to return!

Save yourself aggravation. Screw to hold the umbrella pole to the base was too difficult to even start. Using pliers I get it started and now won’t tighten to hold the umbrella pole. Useless. A simple product should work more smoothly. Apparently no quality control. It’s in the garbage now. Have to buy at Home Depot. Disappointed.

The stand, filled with water lacks rigidity. It rocks back and forth because it is just a water-filled bladder. There is no internal bracing. When the wind comes up the whole thing just falls over. This happens even though additional weight is put on top of the bladder and the umbrella is folded down. Terrible design. Recommend that sand be used instead of water.

Filled the stand with water but that was not enough to hold the umbrella when a little wind hit. Stand flew over and umbrella broke.

MUCH EASIER TO HANDLE THAN HEAVY METAL OR CONCRETE BASES; ONLY PROBLEM WAS CRACK THAT DEVELOPED IN BOTTOM AFTER 6 MONTHS; BOUGHT ANOTHER ONE!

Parts missing. I have another one. It's perfect. I need a set of parts for this one and have been too busy to request them! Thanks for attention!

I gave this quilt set in queen and initially the twin was unavailable. Now that it’s back in stock and delivered I have a matching set. Great shore house look, and acceptable for boys as well girls.