IBrightstar Switchback Projector Replacement Daytime Lights & Lighting Accessories for Bulbs Review

Fits my 2014 Highlander; However, since my car didn't originally have LEDs, the problem is with the hyperflash. The computer doesn't recognize the LED and behaves like I have a burned out lightbulb and blinks rapidly. Spend $10 more and buy bulbs with built-in resistors if your car didn't have LEDs.

This is an amazing must-have upgrade for any Goldwing. The white LEDs are very bright and provide valuable illumination at night. Increased visibility and amber LEDs are visible from a greater distance compared to stock bulbs. There was only 1 premature failure when the white side was not illuminated. No warranty issues. Super quick replacement. I have ordered several pairs for my bikes and also for friends. I would recommend them to everyone.

I bought these about 8 months ago for a 15' Equinox. There is no resistor built into the circuit, so you need to add a load resistor to avoid excessive flickering. 1 burned out recently so I contacted iBrightstar and they replied the same day. You have to buy another set and send them your # order but it was sent back to me the same day. I strongly recommend doing business with them. Become a regular customer.

Let's get down to business. Due to the low wattage the bulb draws, my truck is tricked into thinking the bulbs are about to burn out, so it's flashing pretty quickly, which is definitely annoying. But the worst thing I've experienced with this bulb is that when the bulb goes from blinking amber to solid white, there is actually a 1-1.5 second delay before it goes solid white but stops blinking so the light is inactive or something idk. This is incredibly annoying.

Strange; 2018 F-150 and used Forscan to prevent hyper flash and error code on dashboard. Oddly, the turn signal portion (amber) flashes hyper (looks like a strobe light) when the turn signals are on and the switch is in the DRL position. They flash normally when the switch is either in park or with the headlights (not DRL) on ...Generally it seems to me like a strobe when blinking.Only the front and rear lights blink normally.I hope the bulbs don't burn out prematurely.More in a few months.

Well I wanted to upgrade my GS300 front turn signals from single filament 7440 to double filament 7443 to have switches. But I forgot that there is an orange disc in the turn signal housing so that the white light doesn't go through. Well I don't use 9005 high beams they fit right in the 9005 hole and now I have some serious DRLs and this whole body looks like glowing orange when the signal is on lol. And you'll find that only half of the bulb actually illuminates the case. The lights are super

Bought to replace more expensive switches on my burnt out 2018 Ford F-150! I've tried other reverse switches as well and it's hard to find a company that understands that the switches work CORRECTLY! These LEDs work CORRECTLY! Not only do they sit very securely in the bulb socket, it is also very important that your bulbs do not fall into the headlight assembly. But even these bulbs are bright, the timing of the change between amber and white is wonderful. But again, these bulbs aren't very…

So last year I changed the F150 headlight housing to a popular aftermarket design with LED strips, back then I went with an LED turn signal bulb. I have previously used the ibrightstar 7443 Amber LED and it worked insanely well! But since my headlights have a reverse switching function, I wanted to imitate this in the indicator housing as well! In the photos below I have yellow headlights on in one picture and I have both normal and reverse gears installed! Amber color and brightness are…