🔌 Enhanced 9005 HB3 9145 H10 Extension Wiring Harness with Adapters and Sockets by iJDMTOY Review

I bought 2 sets of these wires because I didn't want to cut into my factory wiring harness to connect turn signals to headlights for my work truck. In the first set I bought, I cut the red wire to give a plus to the turn signals, connected everything, and the turn signals burned out, it started smoking. I bought another set because the second turn signal had to be connected differently, and I already applied shrink tubing to the first set. When I connected them I noticed that the ground wires…

PRO: The wiring on these extensions appears to be of good quality and all the terminals on mine were properly crimped to 18AWG 105*C wires. CONS: Unfortunately the plugs connect very loosely and the large gasket on the socket does not make full contact with the body of the plug, when the plugs are mated it is not a watertight or even watertight connection. The connector housing on each extension also lacks seals around the wires where they enter the connector, making it easy for water and road…

These are automotive quality connectors designed for use in dirty and wet environments. In my case under the hood. These connectors HAVE a main seal that seals the plug and socket together and the socket has wire seals on each wire (which prevents dirt or water from getting to the back of this connector. But for some unknown reason the plug does not have a wire seal , leaving the pins and their contacts fully exposed.With a mated pair of connectors, there are always three points of entry for…