Enhance Your SUBARU Performance with our New Intake Exhaust Engine Valves Kit - Fit for SUBARU 2.2L 2.5L SOHC EJ22E EJ25 Engines (1999-2010) Review

. After installing the timing belt on my car incorrectly and bending the intake valves, I bought them. Due to some other issues I just used the intake valves and left the old exhaust valves alone. They got into the car without any problems, the car drives normally. It should be noted that you will also need to replace the valve seals, which are not included in the kit.

I have a 2005 Outback, I had to replace the head gasket, the valves were corroded and I chose this kit while the car is behaving better than it did before the head gasket work, mainly because mine previous valves have lost pressure. I will update this review in a few months to let you know how things are or if there is an issue. The information appears to be reliable.

I have a 2005 Outback, needed to have the head gasket changed, the valves were corroded and chose this kit as the car runs better than before the head gasket worked, mainly because my previous valves were leaking pressure. I'll update this review in a few months to let you know how it's going or if it's going down. The information appears to be reliable.

On my 2007 Subaru Outback SOHC 2.5 the timing belt broke causing 10 valves to be bent. The car has over 220,000 miles and has used them to replace bent ones. I replaced the valves myself and lapped them in manually. They fit like stock valves with no problems. I've only driven the car a few hundred miles since they were replaced but the car runs great and I was able to overhaul the engine.

I bought these for a 2005 Subaru Forester 2.5L EJ253 SOHC engine. They arrived individually wrapped in plastic and together in a small cardboard box. Shafts, surfaces and tips are ground to a high gloss, but all other plastic surfaces have a rough "cast" surface (see photo). The intake valves weigh an average of 54.4 grams and are 120.50–120.56 mm long. Exhaust valves weighed an average of 46.8 grams and were 121.60–121.63 mm long. Movement length: inside: 120.6 mm, outside: 121.7 mm. I lapped…