Pros
- Accurately detects pressure in automotive radiators.
Cons
- Requires knowledge and expertise to use effectively.
JIFETOR Radiator Pressure Automotive Detector Tools & Equipment Review
3
·
Excellent
Rating
5.0
💧 Cooling & Water Pump Tools, 🔧 Automotive Tools & Equipment
Media
(4)
Description of JIFETOR Radiator Pressure Automotive Detector Tools & Equipment
AN ESSENTIAL TOOL: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem. WIDE USAGE: Coolant system leak checker tool set is equipped with 12 specific aluminum adapters, solid and durable, widely compatible with Cadillac, Benz, Buick, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishl, Nissan, Mazda, Toyota, Infiniti, Volvo, Saab and so on. All these adapters are color coded, number marked and placed exclusively, can be easily selected according to the marked number in instruction, convenient and no confusion. Check if the adapter caps are suitable when get the kit. HAND PUMP LEAK DETECTOR: Radiator pressure test tool uses aluminum pump cylinder rather than plastic one, 21" rubber nylon resin hoses, brass fittings, solid and durable. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly. The flat operation handle design is more convenient for palm to force. EASY TO OPERATE: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that there isleakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate. SATISFACTORY CUSTOMER SERVICE: The included stainless steel thermometer with index wide range 0 to 200°C (32 to 400°F). Customized blow molding case keeps everything in place and protects the gauges during storage. 30 days full refund with returned undamaged JIFETOR cooling system leakage detector set. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours.
Hide
Pros
- EASY TO USE: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on the radiator opening. Operate the hand pump at up to 10-15 psi (avoid pressures up to 35 psi). Check the pressure gauge reading, if the reading drops automatically, it means there may be a leak in the radiator. Please check the cooling system and repair if necessary. It usually takes about 10 minutes to test for leaks, very easy and quick to use.
Cons
- Can I add something?
Pros
- MANUAL PUMP LEAK: The radiator pressure tester uses aluminum pump cylinder, no plastic, 21-inch rubber and nylon resin hoses, brass fittings, strong and durable. 3 inch dial with index range from 0 to 35 psi (0 to 2.5 bar), easy to observe. Chrome plated brass quick coupling with safety valve connects to radiator adapters quickly and easily. The flat design of the control button is more convenient to press with the palm of your hand.
Cons
- Periodicity
