KFI Products 105745 Universal Mount Review

Very strong attachment. Used it on my Polaris Sportsman 570. It fits the plow I had on my Suzuki. The distance between pushrod mounting points is 14 3/4" on center. It took a bit of drilling in the skid plate to attach the bracket. All hardware is included in the package, making it suitable for almost any ATV.

I was even able to keep the original skid plate and just drill holes in the plastic to get the U-bolts through. I used a 1/2" drill bit and trimmed it a bit more with a knife. Be sure to try different types of U-bolts to see which one works best. There's a really good choice out there for the job.

5 month update: After my initial review I changed the mounting position for a better fit. I've used my plow about 7 or 8 times since winter started here in Minneapolis. So far he's doing great. I bought this mount because when I switched from a '97 Xplorer 300 to a 2017 Sportsman 570, the plow mount I had didn't fit the new 4 wheel. It does! It's not ideal, but it will do the job. 2017 Polaris Sportsman 570.

It didn't fit my plow so it's not universal for all plows My village plow blades run down the middle of the machine They were wider I used it I cut and welded a new piece in the middle Me got it working but i have also ordered others which were wrong do your homework this is an expensive option there are definitely others i have gotten returned but i could tell they were much stronger

Easy to install. Here are a few tips: Use the ramps to raise the front of the ATV. Remove the protective panel (temporarily) - you can remount it after trimming. Use zip ties to hold the outer brackets in place while you check the center bracket is seated. Lightly screw on outer angle and middle angle. Then start tightening everything. Not TOO tight as you will likely need to make some final adjustments when attaching the plow tubes. Took about an hour with 2 people.