🚗 Kshineni Car Foam Drill 3-Inch Buffing Pad Kit: 11 Pcs Polishing Pads for Car Buffing, Waxing, and Sealing Glaze Review

There were scratches and paint stains on the cars. Wow! Using Turtle Wax Scratch Remover, my drill and this product has worked wonders. It took a while and had to do it a few times on the worst spots but it worked. With the newest car, I thought I'd have to take it to touch up the paint. That is the difference. Basically an inexpensive tool that gave me super professional results.

Loved the included buffing pads and buffing pad. I went through all the pads, took my time and it was worth the work. The yellow haze disappeared and I had to use wet 1200 grit sand to remove the corrosion. I then used the Chemical Guys headlight restorer and restored the headlights to factory condition with all the seals. The pads still look like new, good quality. Make sure the pads don't get too hot while buffing and keep the drill RPM below 1800. Don't forget to rinse the pads when you're…

I bought this set of gaskets and base plates to try to restore my oxidized headlights. I used the orange pad in combination with Meguire's Plastic Polish. I attached the base plate and drive rod to the cordless drill. I then put painter's tape around each headlight to protect the paint. I applied a small amount of plastic polish with the orange pad and started buffing. The results were truly amazing and almost no effort was required. After I finished both headlights I rinsed the orange pad with