KSP ATV Wheel Spacers 4x156mm, 2-Inch with 12x1.5 Studs - Fits 2013+ Polaris Ranger, 2014+ Polaris RZR XP 1000, 2015+ Polaris RZR - Includes 3/8“-24 and M12x1.5 Lug Nuts (4pcs) Review

Allows me to use 14" XP1000 wheels with 29" Maxxis tires on my 900 Trail 50". Easy Installation, make sure you use red screw lock Overall great price, great product!

Rzr stud holes are sealed. I just used a 17mm deep "chrome" fountain head and it barely fit. The impact bushing does not fit, too thick to fit the hole. and that's what she said.

I wanted to use the newer 1000 RZR wheels and it allowed me to swap out the 3/8" lugs for the larger 12mm lugs. I later changed the 3/8" bolts to 12mm and everything still works as advertised with the same washers. Good product and recommended.

Great spacers so far, I've only worn them for a short time but seem to be good. The only downside is that the nuts that go with it to attach the seal to the main lugs were the wrong size. but I just used the Polaris Ranger so no big deal!

Well built and easy to assemble. I put them on my 2016 RZR 4 Turbo. Even with extra nuts. Driven a few hundred kilometers with it without any problems. They added more stability and a more aggressive look.

Great for the money. The only thing that didn't suit me was the different thickness of the wall that the nuts are attached to. You need a fairly thin walled sprocket to fit these and some of the holes were slightly smaller than others and/or there were manufacturing burrs that interfered with socket entry. It was an easy fix, but it would be nice if I didn't have to fix it.

For mounting 2017 27" RZR 1000S wheels with 12mm studs to a 2015 rzr 570 with 3/8" studs. Nuts were included in both sizes. Only four sprockets could only hook about 3/4 of the nut threads due to the 3/8 rear studs (the holes in the gasket need to be milled deeper). So far so good after 400km. It is also necessary to use a thin head to go through the holes in the gasket, which can be a standard no-strike head. Note that the 1.5" width also adds stability to this 570 rzr trail compared to the…

I was hesitant to buy because you usually get what you pay for, but these things worked great on my 2020 RZR Pro XP4. I used them to ride the Oregon dunes for a wider stance with factory wheels and tires. I had to use a standard deep nozzle that fits snugly and file two small burrs on a gasket as such minimal intrusion would not allow the nozzle to be seated. Once there I tested them immediately, hitting pops, sand, mud, water and even jumping a few times. I checked the tight fit several times…

I was hesitant to buy because you usually get what you pay for, but these things worked great on my 2020 RZR Pro XP4. I used them to ride the Oregon dunes for a wider stance with factory wheels and tires. I had to use a standard deep nozzle that fits snugly and file two small burrs on a gasket as such minimal intrusion would not allow the nozzle to be seated. Once there I tested them immediately, hitting pops, sand, mud, water and even jumping a few times. I checked the tight fit several times…