LASFIT Canbus Ready Signal Light（2Pcs） Review

The red LED is bright but it always shines brightly when it's supposed to be just a faint taillight and my car still has a bulb warning when the taillights are on and I press the brake pedal. I also bought Lasfit switchable LEDs for my headlights and they worked correctly in both the front and rear ports where those red LEDs are always bright. I don't know why they made them different like their reverse shift and all yellow LEDs but unfortunately I had to send them back.

My client wanted to completely replace their outdoor lighting with LEDs. They were very bright, but turns out you still need pull-up resistors, so be careful ⚠️. after changing the lasfit derailleurs everything still worked fully as it should, but with the rear/turn signal bulbs they only started to hyperplasia after the headlights were switched on. Had to drop 2 load resistors from the back directions which solved the problem. I think many LED replacements can still cause lower vehicle…

Whilst it is true that they prevented the 'bulb failure' warning on my wife's 2003 T-Bird they have not YET been able to be used in this car as you are seated just there and "flashed" in the taillight position, which also rendered them useless as they overrode their own brake brightness function. I installed them in my '91 Chevy pickup and they worked fine except flashing quickly in turn signal mode. The 3 star rating is solely because I installed LED turn signals in my truck to slow them down…

I was so impressed with the Amber LASFIT 3157 for the front turn signals I thought it was cool. Unfortunately, they cause many problems. There were no problems on the first day of driving. Now they suddenly blink. At first it was only a left signal, but on the third day it became a right signal as well. I'm trying to decide whether I'll just return them or install load resistors. i love brightness They are at least three times brighter than traditional halogens. But for $50 they should have…

Due to the size of these lamps, one of my lamps has the inner lens broken. However, since it is only internal and the light bulb itself glows red, it still works in terms of color. However, the resistance they use to simulate the train is so cheap that when heated it loses resistance and the machine goes back into hyper-flash mode. So basically if your running lights are on and then you use your turn signal it will go into a hyper flash or if you leave your turn signal on for a short period of…

I installed 2 of these in a 2002 Mustang taillight housing. These bulbs are larger but they fit in the case. Turns out they get installed in my 2014 Xterra taillight as well. These LEDs are much brighter than other 3157 LEDs I've used. Anyway, I was hoping these lights would fix my disabled speed/cruise control in my Mustang as they are CANBUS certified. But they didn't. All the LEDs I've tried disable the cruise control. Putting just a standard bulb in external cartridges made the cruise…