🔧 RV Vent Fan Motor 12V D-Shaft Replacement for Leisure Coachworks RV Bathroom Vent Fan, Camper Exhaust Fan Motor Review

Leisure Coachworks Bathroom Fan Motor 12V Vent Hood Motor with your existing fan to rid your RV, camper, or travel trailer of lingering smells and built-up moisture; This roof vent motor is quiet and can be used to power an RV vent fan such as a bathroom fan or a range hood fan. 12-volt motor has D-Shaft - Weight: 3.2 oz - Fits Elixir, Heng's, Jensen and Ventline. ROTATION: This bathroom vent fan motor replacement has reverse polarity, meaning that it can be wired to turn in either clockwise or counter-clockwise rotations; Rotation direction depends on your fan blade wiring (one wire goes to the hot side of switch, other goes to ground); To determine the direction of spin on your existing fan, look down through the motor at the top of the blade. Wire your fan to the motor switch, then wire the switch to your RV; Ensure that the wires connect black to black (grounds) and the other wires connect together; Save your old fan blades – Pull on the hub (center part of blades) off the shaft and push blade center hub back on the new motor shaft (Flat side on motor shaft used to align hole in hub and slide on); mounting screws and fan blade not included. FITS YOUR RV: 1/8-inch diameter x 3/5-inch length (3.17mm x 15mm) half-moon (D-shaped) shaft; 1-2/5-inch diameter x 2-1/5-inch length (36mm x 57mm) body; Compatible with Elixir, Heng's, Jensen, Ventline, and similar 6-inch (15.2cm) fan blades; There are multiple heights for the bathroom fan motor assembly - Compare this unit measurements with your current exhaust fan motors unit to ensure exact fit.