LIUCOGXI Hatchery Incubator Practical Aquarium Review

MATERIAL: The brine shrimp hatchery kit is made of high quality acrylic which features nontoxic, harmless, sturdy, durable, not easy to crack or break and can be used for a long service life. It is safe for your baby fishes and shrimps. EASY to USE: Connect the air pump to the air inlet at the bottom of the incubator, inject the treated water to the standard water level in the incubator tank, and add about 10g sea salt to pre-dissolve, then add 3-5g brine shrimp eggs and adjust the appropriate air volume. INSTALLATION: There are two ways to install our brine shrimp hatcher machine.You can use the four suction cup of shrimp incubator to stick it to the tank glass inside or you wanna install it out of the tank glass then you can use the tripod to install out of the fish tank. PROVIDE OXYGEN 1: The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at the bottom of the incubator to collect brine shrimp. Note that the direction of the inlet and outlet of the check valve must be installed correctly with the pipe, otherwise the air pump will not be able to discharge air. PROVIDE OXYGEN 2: The second way to provide oxygen to the brine shrimp from the bottom hole of the incubator. Please note the direction of the inlet and outlet of the check valve and the pipe must be installed correctly, otherwise the air pump will not be able to output air, and the trim valve needs to be opened. When the brine shrimp has hatched, first turn off the trim valve, then pull out the air pump tube from the trim valve, and then open the trim valve to start collecting brine shrimp.