🧪 Enhanced Print Head Cleaner and Unblocker Kit - Magic Bullet Review

Magic Bullet seems to have designed this product for inkjet printers with cartridges held in the print head. I have an r3000 which has little hoses that lead the ink to the heads but I didn't realize it until the Magic Bullet arrived and I started poking around in it. I was disappointed in myself for not understanding the difference, but then something wonderful happened. I found ANOTHER video on the internet made specifically for the r3000. I followed the instructions there and lo and behold…

Wow. And wow, I had such a jammed printer. He stood for more than a year and nothing flowed from the nozzle. I couldn't even get a flow through the syringe into any but one of the heads; at least initially. But after being patient and just getting the Magic Bullet's solution to touch the inlet ports on the head, eventually they all came loose and I was able to force some of the solution through them. I had to do a full clean twice on each nozzle and a third time on two. I also decided to change

As the name suggests. It's a magic bullet. I have Epson R2880. I wish I could say I type every week, but I don't. Hence the clogged head. I've tried everything under the sun to clean it but to no avail. Use the product for its intended purpose. You may have to do this multiple times. Don't worry, there are many solutions. Two mistakes I made: 1. If the syringe tubing is connected to the colored connector, DO NOT PUSH the syringe plunger too hard. Remember that you are trying to force liquid…

Getting to grips with the connecting hoses to the printheads is a little tricky because you don't want to rape and destroy the printhead. But if you are patient, gently place the hoses on the printheads and install completely, you will be cleaning the printheads in no time! I cannot stress enough that you must follow the instructions. You will be tempted to do it faster, but slowly inject 1ml of cleaning solution, leave for half an hour, inject the remaining 1ml, wait a little longer and then…

I have an Epson Artisan 837. I needed to print 200 bookmarks. The first 100 printed flawlessly. The colors of the second batch were far away. Cyan and yellow did not print. I cleared my head 2-3 times - nothing. I didn't feel like buying another printer, so I tried the Magic Bullet Printhead Cleaning and Unlocking Kit. I liked that he had two syringes and I plugged both heads at the same time. I left her about 3 hours. - not the 30 minutes he suggested. I poured the cleaning liquid in and…

We bought a used IPF760 for quite a bit of money knowing that the price they were selling it for probably wasn't 'in perfect condition' , when they stopped using . During the initial setup, we discovered that the printer had a "printhead failure" and needed to be replaced. Since printheads range from $350 to $450 depending on whether you're willing to take the risk of buying from an unauthorized Canon dealer, we decided to give it a try. We checked out a video we found online and initially…

I almost threw away my favorite printer and bought a new one. My old Epson CX3800 printer was printing strangely. Sometimes the images were very blue, sometimes yellow. I've tried changing ink cartridges and cleaning the heads (now I know that's absolutely WRONG). Finally, he stopped printing magenta and yellow altogether. The printhead was completely clogged. I searched the internet and found a video about the Magic Bullet printhead cleaner and although it looked too good to be true if it…