📦 Mailiya 6 Pack PCIe Riser: Dual Chip GPU Riser with USB 3.0 Extension Cable - Perfect for Ethereum Mining! Review

After 20 days of use, one of the six devices ordered no longer worked. The 1 in 6 bounce rate is 16.66% in the first 30 days. Why do they still include SATA cables when everyone uses 6-pin connectors for sure? Waste SATA ports are updated when another error occurs

Decided to buy Mintcell brand risers to try. Unfortunately 1 out of 6 arrived dead on arrival. The map is not published at all. All connections were quadruple tested and we tried the faulty adapter in a single GPU setup where all other components were known to work. Aggravating.

I love them. I bought 2 packs of 6 for Asus 250 mining motherboard. The vertical orientation of the USB connector on the PCIe 1x riser is perfect for the Asus 250's closely spaced slots. All 12 have worked great for the past few months.

These riser cards appear to be well made and have a more integrated 6 pin PCI-E connector instead of the old 4 pin Molex junk from the 90's. I'll update this once I get my mining rig together and see what it does, but overall they seem well made. No crappy solder, no loose SMDs and the cables are good quality too. More importantly, 6-pin PCI-E SATA cables have the same SEGMENT of wires as my PSU, so I know the wire doesn't over-current and therefore shouldn't overheat.

Edit 12/26/2017. The seller quickly refunded two broken straps, so the rating was changed to 5 stars for very good customer service. 2 out of 6 causes three separate reference and non-reference Vega 64 cards in my setup to reliably fail (changed registration and pulled 160 watts from wall to card) when connected to the EVGA 1000 G3 6-pin PCIe connector connected to the riser. The other 4 work without problems. Sata is not used in my case as they only have a max current of 4.5 amps and so could…