Members Mark, Sam'S Club, Bakers And Chefs, Grand Hall Gas Grills - Pack Of 3 Cast Iron Burner Replacement Parts By Direct Store Parts DB104 Review

Items were exactly what I ordered and needed. One helpful fact for the reader of this replacement part should look for. I believe the original cast iron burners failed due to the lack of enough pressure flow of propane into the burner. The two of three old burners failed because the propane wasn't burning on the outside rim where the flame should be. The propane/air mix was burning inside the large cavity of the burner. The top grill hides the burners, for the most part, but if you listen to…

The description says that these fit the Sam's Club Members Mark Monarch04ALP (manufactured by Grand Hall), but that is not correct. They do not fit! However, you can make them fit if you make a slight modification to the grill. The problem is that the "leg" on one end of the burner is about 3/4-inch wider than the original (see photo) and the corner of the burner is more square than the original. There is a sheet metal spacer inside the grill that appears to exist only to help align the burners

About a 1/4 inch longer then the original, but I made slight modification and works great (I wrapped aluminum paper around top end so it won't shift off balance….very easy fix). I have to buy these burners seems like every couple of years as they tend to rust easily. That's not a good thing as they're not cheap! The newer burners on newer grills are made of better quality stainless steel….but I'm not going to spend $1,000 for a new grill when my old one is still working fine.

I had the old rusted out steel burners in a grill that was no longer manufactured so I couldn't find and exact fit. I wanted cast iron replacement burners so I ordered these. The end that goes to the valve was too big in diameter to fit the opening in my grill, but with a jig saw and some pliers, I made it work. Nice to have my grill heat evenly across the entire cooking surfaces.

I have a Members Mark Y0660LP-2 stainless steel grill that I got back in 2004 -- and, believe it or not, this is the first time I've changed out the original cast iron burners. Don't be too amazed though.I really should have done this a couple years ago. The old ones just fell apart in my hands. Lesson learned.I decided to go with this 3-burner combo, as opposed to splurging on the cast stainless burners that you can also find on Ebay. This set of 3 burners was a couple bucks less than just one

I purchased these as replacements for my Member's Mark grille, (Model #Y0101XC) and they fit perfectly! Installation takes literally 5-seconds per burner and they work just like my originals, which had corroded and broken apart after 15-years of use. When I completed the upgrade (I also replaced the ceramic tiles with metal flame tamers found at a Walmart), my wife asked me how much it had cost to repair the grille to work like new and was surprised when I told her less than $90.00 for…

Install was mostly pretty straightforward and easy. This grill went from a piece of junk (original burners were super rusted and falling apart) I picked up for free off the side of the road to the best grill I could never afford! The flames are even and this thing gets wicked HOT fast. Only complaint I have would be the low grade hardware. I decided to get rid of the provided screws (that were loose anyway out of the box) and replaced them with harder hex bolts and lock washers.

Only problem with installation is placing locking clips, basically you cannot see pin hole therefore installation is by feel. Burners worked perfectly without any adjustment.

Perfect fit for my Members Mark grill. My old parts were rotted past using. I cleaned up the debris, installed the new parts which was a snap and I have a new grill. Parts are very high quality and I'm confident will last for years.

Ordered these for my Members Mark grill that was over 14 years old. Took about 20 minutes to remove old burners and replace with these. They fit perfectly and now the grill has more even heat all around. Let's hope the grill last another 14 years.

This is the third set of burners for my grill that’s 18 years old. Price is great. Fit perfectly. However they started to rust after one night. I’m seasoning again tonight. And hopefully this isn’t a constant problem. Last set lasted about ten years.

This is my third one only because I have given two away as gifts so happy with the product quality makes the food taste so good as if you were outside grilling

bought to replace burners on a Sams club. originals lasted about 10 years, these only 2-3 before rusting out. not suggesting to buy stainless, but buy it once and done. just expensive

The cast iron burners fit my Members Mark grill like oem burners and throw a nice even flame. My grill is SS and is twenty years old and purchase new burners every 3/4 years. I would definitely buy these again.

Arrived quickly and works great. Si le quedó bien a mi asador! Very easy install. Expecting 3-5 years from these based on prior purchase.

I was thinking of getting a new grill but these burners are the perfect replacement.saved me a ton of money.well worth the price

I saw they were not single casts like my rusted out originals. but if your gonna save cost by doing a two peice assembly, at least tighten the screws before packaging. All of the screws on mine were loose, one was backed out at least 1/8". Not 100% sure what the gasket material is, but after delivery with loose screws, I almost took them completely apart to replace it with hightemp epoxy, but if I did, the cost and my time would have put me in range of higher end replacements. so I just torqued

Wow! Why did I wait so long to replace my burners! This kit of 3 burners seem to be high quality and took me about 5 minutes to install. After putting the grill back together, I fired it up and was amazed at the difference. Even blue flames all the way around put out lots of heat. I grilled the best steaks in a long time that night. Would definitely buy these again.

The replacement arrived quickly and were easy to install. It seams like good quality, but I haven’t cooked on them yet. That's my review!

These were exact replacements for my 15 year old (Sams club, members mark, Grand Hall) grill. Surprised and happy that parts still available for this (expensive when purchased) grill!