🔊 Nissan/Infiniti Speaker Adapter: Metra 82-7400 - Enhance Your Car Audio Experience Review

This product does not match the factory bores. But all you need is a sharp drill bit to make the cuts 1/4" deeper on all three sides. Otherwise, it worked great on my 2018 Nissan Murano.

I used these to install some speakers on a 2017 Nissan Sentra SR and they didn't fit right out of the box but with a few minor modifications I was still able to get them to work However, if you are looking for plug and play wiring harnesses, this product is not for you.

This is a great price and saved me the time and effort of having to re-make the original cover to match the new speakers I replaced. The adapter fits perfectly on the door and the holes in the adapter make it easy and simple to attach the speaker and screws. 🛒😁👍

Well I ordered them for my wife Nissan Versa 2007 and the holes to attach to the door panel didn't match, they were all torn off so I had to make new holes to install them next to the Screws they send with the kit are too long for what you need them for so I cut each screw in half with my dremel and punched new mounting holes in my door. and mounted them. I had to make mods but they worked. It was just frustrating that they had to fit just because they're for this car and they didn't fit.

Installed on 2008 Versa S 1.8L both front and rear doors with new holes because cheap factory speakers had 6.5" mounting holes and that was 6.75". -Holes They come out a little off center. I installed the deepest Pioneer TS-D1702r basket in the front and the Pioneer TS-A1686r in the rear and there is still about 1/4 inch or a little more clearance for the glass to fall freely. The speakers mount straight and flat in the center, not rounded like other mounting kits people have described. I put…

So this made my job easier. I bought a nice set of 6 inch speakers for my car and ended up finding that they didn't fit the factory cut out perfectly. I wasn't worried. Let me tell you, I really like things that don't cause fear. There are enough pre-drilled holes to accommodate the speaker and perfectly aligned placement holes to screw into the factory cutout. what I wanted and the price was really decent. It's hard to make the wrong decision here.

That's a great price and saved me the time and effort of remaking my native case for the new speakers I replaced. The adapter fits perfectly on the door and the holes in the adapter make it easy and simple to attach the speaker and screws. 🛒😁👍

I ordered them for my wife 2007 Nissan Versa and the holes to attach to the door panel didn't match, they were all torn off so I had to make new holes to attach except also the screws are that they send with the kit, too long for what you need them for, so I cut each screw in half with my dremel, punched new mounting holes in my door and installed them. I had to make mods but they worked. It was just frustrating that they had to fit just because they're for this car and they didn't fit.

Well, that made my job easier. I bought a nice set of 6 inch speakers for my car and ended up finding that they didn't fit the factory cut out perfectly. I wasn't worried. Let me tell you, I really like things that don't cause fear. There are enough pre-drilled holes to accommodate the speaker and perfectly aligned placement holes to screw into the factory cutout. what I wanted and the price was really decent. It's hard to make the wrong decision here.