🔌 Motorcraft WR6054 Ignition Wire: Optimal Performance for Enhanced Ignition System Review

I installed it for a short time. I also switched the forks to Motor Craft forks when I switched my coilpack to Motor Craft. The coil was bad, but I decided to change the candles and wires at the same time. Anyone who has done this job on WinStar 2002 knows why. Works perfectly.

I got the price from Advanced Auto Parts and Auto Zone and it was double, almost triple the price. Fixed my 2001 Ford Wind Star having a rough idle. I also replaced the ignition coil, which I also bought from Revain, and saved over half the cost of today's auto parts. Perfect fit at a great price and saved a TON!

The length was very tight. Quality and price were very good. The wires are snapped well at both ends. I also changed the spark plugs and ignition coil. There were sporadic misfires in cylinder 3 by code. Now my 03 Windstar works great. The cables are not numbered as in the original. I suggest switching them one at a time to preserve the firing order.

Worked great on my 2001 Windstar with 115,000 miles. Improved idle, smooth ride and good pickup. The length was almost identical to the factory wires. I used this with an Autolite APP105 Double Platinum spark plug. I removed the shroud to get better access to the three rear connectors, but they were still difficult to access. The job took a little over 2 hours in total. If you've forgotten where the spark plugs go after they're pulled out, you can look at a chart that shows the firing order.

The set I received turned out to be defective. I replaced the spark plugs and wires on my van due to a misfire and I still misfired after that so I had trouble diagnosing the problem. After installing a new fuel injector and throttle position sensor that I don't need and paying the shop to tell me I have a bad wire, I now have to buy another set of wires. I'm out of the 30 day return window so I'm out of luck. I've had other issues with the auto parts I got from Revain, it might just be my bad…