Organize Your Workplace With Kantek'S Three-Shelf Mobile Printer/Fax Stand In Black Review

I was going crazy with our little corner office at home: The kids use it for homework, I do my bills there, and before this cart the two printers were always getting in the way. Both were on the floor or some other bad configuration (on the floor blocking the window access; on the floor one on top of the other, or one on the floor and the other up on the desk crowding the computer, etc.) Needless to say, it was messy and cluttered. Finally I broke down and measured my under-table opening and…

From the moment I opened the package and took inventory of all the parts, to the moment I rolled it under my desk and began writing this review, it took me a whopping 20 minutes from start to finish. A beautiful and practical product. I am very content with my purchase. It fits underneath my desk beautifully, and if I ever move it out from underneath the desk, I would be proud to have it seen. Thanks for a wonderful product.

I know I shouldn't expect much for $40. But I have purchased better-quality resin furniture at Walmart for much less money. This printer stand is flimsy, and made of fragile plastic that doesn't take much force to break it - I'm fairly certain this isn't resin, but I wish it was. In my uploaded photo, it shows my two small printers sitting on a caster-less stand. The 2 printers probably total 35 to 40 lbs. added together at the most. (Epson XP-800 and a small HP LaserJet 1018.) The first time I

This printer stand is great. I bought this to get my printer off my desk in my home office to have a little more room and this fit the bill perfectly. It was a piece of cake to put together (literally no more than 10 minutes) and is very secure. Note that it will only fit a smaller sized printer on the top shelf, so if you have a larger printer, this isn't for you. The two lower shelves are very handy for storage and the two front wheels lock in place to prevent rolling. It also has a small…

My home work space was a mess. I had just a shelf with my computer and printer on it--no room for typing paper,extra ink cartridges, or much of anything else. Bought the 2-shelf stand and YAY! It's small enough to fit right under my shelf but big enough to hold every single thing that was cluttering the desk. (I kept the printer on top and used that space to hold typing paper and other stuff in a wire holder). Other essentials fit nicely on the second shelf.Easy to assemble( took about a…

Have a laser printer and an inkjet on it. stand is too small for the inkjet. would have been better if it was a bit larger. my error. inkjet is about 7 years old and maybe too big.

This makes a perfect stand for about any printer. It's rated up to 75 pounds, so while it might not support a copying machine, you'd be hard pressed to find a printer that wouldn't be a good match. It rolls nicely, even on fairly thick carpeting, and you can lock two of the wheels if needed. It's so simple to put together, that the instructions are literally one small page with nothing more than a diagram. If you can put together Legos, you shouldn't have any trouble with this. Since it's made…

This stand really exceeded my expectations in several ways. It arrived one day early. The box was size appropriate and protected the components. I assembled the stand in 10 minutes using no tools using the one page instructions. Although the stand is plastic, it is black and soft to touch. One in use you don't really notice that its plastic. The size is perfect for a standalone printer stand, with 3 shelves and a 2 inch deep drawer that we keep spare ink cartridges in. The height of the stand…

I have a Lexmark printer all in one with built in fax machine, and it fits perfectly. I was able to adjust the height so it fits right under the edge of my desk that hangs over the side, making it take up less space and helps limit the amount that it shakes when it's in use.All printers vibrate when they are printing, that is normal.I put the drawer under the middle shelf, making it easier to access.The drawer is the perfect size to hold all my ink cartridges and the other shelves are the…

When I put this together a piece broke. Thankfully Revain sent me an entirely new stand as a replacement but that one was missing pieces. Thank god the piece I needed to repair the original wasn't one of the missing pieces and I was able to make due.

I really like it, but it was missing a top end cap for one of the legs, can you send me one so that it looks nice? It might be too low to the ground for some users' preferences!

I am a clumsy novice when it comes to DIY projects. Any thing harder then replacing a light bulb gives me a case of anger & frustration. This cart came in easy to assembly pieces basically snap wheels in place put posts on first shelf. Then place second shelf put caps on shelf top. I have a HP Officejet printer & it fits fine the shelf below will store my extra laptop & a pack of paper.it seems sturdy enough to hold maybe a second printer or a few reams of paper on first shelf. I'm 5'9" &…

Well, I bought this product "Used- Like New - Item will come in original packaging" from Revain Warehouse. It was a fantastic price, and now I know why it was listed at such a good price. It was missing most of the parts to it. I only have 6 of the 26 parts. It came with the two shelves and the four caps for the top shelf. Needless to say, I was unable to put it together.The shelves themselves seem to be very sturdy and well made. So, while I will not be returning it, I am very disappointed…

Sturdy enough for plastic, and the drawer is a nice feature. Mine arrived with a small piece broken on a leg, but I used superglue to fix rather than return. The wheels have locking tabs for stability. My new heavier laser printer fits on it fine. Supposedly holds up to 40#.

this little gem is just what i needed to roll my printer under and out of sight from my desk and out when i need it. great buy, not so easy to assemble (directions are drawings that are not not quite clear and pieces are stuck together and must be pulled apart before assembly). that said, i love it and it is just what i wanted.

Really light weight plastic. But it's holding up an HP Officejet Pro 8620 which is about as tall as the printer stand and a few inches wider. Doesn't seem to be straining under the weight of the scanner which I'd place at 35 lbs. Stands about one foot and half off ground from base of wheel to top of top shelf. No tools, snaps together real easy. Don't expect to have it falling apart or over if all I do is keep the scanner on it. Wanted the wheels to roll in and out of position when I started to

I purchased the Two-Shelf Mobile printer stand, because I wanted something that would fit under the l-shaped desk in my sewing room. I wanted something mobile, small, reasonably attractive and low cost. This couldn't have fit the bill any better! It does fit easily under the desk, but I have decided to station it beside it instead. The height is extremely easy to adjust. It took about five minutes to assemble and is stable and rolls easily. It seems to be everything that I was looking for and I

This is a sturdy little stand that his perfect for a "chair side" printer. Simple to assemble, very sturdy, extra shelves are always handy too.Two reasons this unit received 4 stars in stead of 5:1. I feel for a bunch of "click together" plastic it's overpriced at almost $90. I bought it anyway so I guess I didn't object that much. It was the exact size I was looking for but I do feel somewhat ripped off with this purchase.2. The drawer is a nice idea but it sticks and is very…

It was easy to assemble an is light weight. the slide out drawer is divided in three sections. It is a little smaller than I had envisioned. I had hoped to stack another printer o a lower shelf but that will not work. That is my fault as they gave the measurements. I can keep pens and misc. small items in the drawer. And I can stack some papers and books on the lower shelves.

I was looking for a printer stand to roll under my desk and free precious space. This stand was reasonably priced, went together easily, and it fits well under my desk. I store extra paper in the bottom shelf. My printer is a HP Officejet All-in-One and if I need to copy or scan, the stand can easily rollout for access.