PALMEXX Enclosure for M.2 M-key NVMe SATA SSD in USB/USBC 3.0 6Gbps Review

Its pros: Compact. One of the most affordable. It is convenient that there are two built-in usb and usb-c connectors, no need to store and carry cables. The metal body dissipates heat well. The kit includes everything you need to install the disk: a screwdriver, rubber fasteners for fixing the disk (with a margin). Different cons: When connected to a laptop, you have to put something on it for support, since the case is too heavy to just hang in the air.

Sharing my detailed product review.With its pros: works, speed is good, no drivers needed, nvme(m-key) and sata SSD Has some cons: there would be a thermal pad included it would be fire

It is difficult to keep the drive in the port: it is heavy. But this is not a shortcoming, but an objective reality. You need to think in advance how you will prop up the device if the usb port is not directly at the level of the table. There are two ports for connecting to a computer, but I happened to use only usb. Different pros: Successful form factor: a very compact case, under the size of the disk. At the same time, a full-fledged case that protects the insides. To be honest, it was just…

Light enough, but I'm afraid that if you use it for a long time and often stick it in / out, then such a load can loosen the computer port.

The case is working. I bought it and samsung 970 evo plus for 1tb. Screen speed via type-c. The curpus itself looks tough, but the caps are strangely made. On usc-s it sits tightly, on the usual it does not hold at all. The case is made in such a way that it will not be convenient to use in a laptop. It will also hang in the hospital. When copying 800GB, it got very hot, let's see how it will be in normal operation.

Has pros: 1. Compact, can be put in your pocket. 2. Metal case. 3. Convenient fixation of the SSD board with rubber bands. Has some cons: In this instance, the end cover, on the side of the USB-A connector, was skewed, so it is impossible to fix it with screws without modification with a file.

Features - long enough, it is worth using either an extension cable or something to enclose - so as not to accidentally loosen the USB or TYPE-C input in your device. Used to put in an old system ssd and get a big flash drive. I upgraded - I laid each SSD chip with thermal pads 1cmX1cm, 2 mm thick for the best heat dissipation through the aluminum case. This is not a manual, do it at your own risk)

With its pros: Nice one piece body. The caps covering the connectors are made in the corresponding style and the same color - they are not striking, like some other similar devices, The massive metal case does a very good job of dissipating heat from the disk, provided that thermal pads are used (they are not included in the kit!): a good thermal pad (I used with a conductivity of 13W / mK) the disk does not heat up over 47 degrees in CrystalDiskMark when performing a random file write in 4Kb s

Pros below: Performs its functions as a fast flash drive with an M2 drive. Can be connected both to a PC via usb3.0 and to a phone via USB-C Cons: The device came with a shortage - there was no mounting plug on the side of the USB connector. But the 3D printer saved the day.

The case dissipates heat well, cloned a 460/400GB system disk from sata ssd samsung to crucial P2 nvme SSD 920GB via type-c in 19 minutes (aomei backuper)