💡 2-Pack Panasonic 820uF 25V Capacitors for LCD TV & Monitor Repair: High-Quality Radial Lead 105C Solution Review

Replaced a swollen capacitor due to a Click of Death on a Samsung TV. This is my second capacitor that I have replaced, the first replacement took 5 years.

Much better than the cheap capacitors Samsung puts in their TVs. At 25V instead of 18V on Samsung TVs and a temperature of 105°C, this capacitor can take a lot of abuse.

Great quality and I used it on my burnt 32 inch Samsung HD monitor! They came up and fired great. They may even be better than what originally came with the monitor. I replaced the rest just in case since I was already in the monitor.

My ln46a540 took a full 5 minutes to start. The back part came off with no wires. Defective capacitors were easy to spot. I just searched and found matching numbers here. Desoldering would have been easier with a solder vacuum, but I managed with a copper wick. Just make sure you leave the TV unplugged for a few days to allow the high-power capacitors to dissipate. Find a YouTube video and you can do it.

Samsung (model LN46A550) has developed a deadly click. After some research I disassembled the panel and found 2 faulty capacitors. ordered and after a quick replacement the TV came back to life. the last 3 months without complaint.

It was pretty obvious that two of the capacitors in my Samsung TV had swollen, resulting in annoying 5 minute power cycles before the TV finally turned on. I was a little nervous about removing the blown ones and installing new ones (I'm not a STRONG soldering iron), but it all went without a hitch. The delivery was a day earlier than expected and the replacement of the capacitors, well they work. The woman will be very happy!

My old 2008 Samsung TV (LN52A530P1FXZA) started to cyclically click when turned on. If you look online, this is a common problem caused by these capacitors failing. From what I can see these are interchangeable replacement parts, same shape and size. This is very easy to fix, but only if you have PCB soldering experience. I hope that the new parts will last as long as the original parts. The photo shows old parts, they are cracked and flow from above.