📺 QualGear QG-TM-001 Picture Hanging Style Ultra Low Profile TV Wall Mount for 37-70 Inch TVs - Silver Review

This really allows my new TCL 75R617 to be mounted as close to the wall as possible. I only have power from the TV so it looks very clean so far. This mount says it can only work with a 70" screen, but my new TV is a 75" screen. My guess is that you don't need to worry about the size of the TV as long as you keep the total weight under the mount's 88-pound limit. vertical brackets are short. I recommend attaching longer rope to the guy ropes so you can pull those ropes down when inserting the…

I'm a big fan of these mounts, I've only bought 3 of these mounts. One attaches with large drywall screws I bought from Home Depot and the other two are screwed in with the masonry screws that came with it. On drywall, they're strong enough to support a 60" Samsung LCD TV (your mileage may vary, be careful!). On brickwork I think you could probably hang them yourself, they're so sturdy. They work very well with a thin TV like the Samsung 8000 series - they sit flush against a wall even when…

Purchased for clean install on white LG 24LJ4840-WU 24" TV. A review of the 'other' white bracket offered by Revain said it didn't fit this person's LG TV, but I was hoping it would. But that's not the case. The 4 outer "wings" will detach leaving the small panel you see in the picture. Unfortunately, the 75mm holes and the construction of the TV are such that the mount does not allow an HDMI cable to be connected. I would normally modify the plate to allow access, but the HDMI cable goes right

Sturdy and easy to install. The wall screw is a 6-point, 3/8" slotted screw and is 2.5" long. Be sure to use a 3/8 inch socket wrench when attaching it to a wall stud as you would be stripping the threads with a power tool. Recently installed Kanto (for 32-inch display) that has a similar build quality. and also has an articulated arm. However, I prefer this QualGear because it sits less than 2 inches flush against the wall and is practically centered on the mount when flush. No more odd offset

This review is for the QG-TM-002-BLK Super Slim Mount. I have previously used a Sanus BLL2-B1 in my latest TV setup and thought I would give this QualGear mount a try as it is cheaper and has a lower profile. Here are the pros and cons: Pros: * QualGear QG-TM-002-BLK has a lower profile on paper (0.4" vs. 0.7") * Used QualGear QG-TM-002-BLK Metal for latches (while Sanus uses plastic). which can break)* The QualGear QG-TM-002-BLK costs less than half of the Sanus model. CONS:* The actual…