Quiet Wings High Speed BL083 Cooling Review

I recommend taking Reobas for them with separate channels and diluting all the coolers according to different independent adjustments so as not to overheat the mosfets, one cooler is one separate regulator. There are no radiators on moscets on cheap reob.

I installed two of these for blowing and 3 pieces at 1000 rpm for blowing out and the body began to blow perfectly, at maximum speeds, of course, the air flow makes noise, but no cod, squeak or anything else is observed from the turntables themselves. Disappear from sale, bought for 950.

I have been looking for classic matte black 140mm coolers for a long time. it's hard to find just black turntables in the LGBT era. I bought it, I did not regret it, for 800 it's just super, 3 years warranty! 1600 rpm! the wire is long enough for any cable management!

Good not noisy turntables have a bi quaet, those to whom they seem noisy in my opinion have not heard real noisy turntables, I put mine on the front of the AS500 dipkul tower, and so this 140 mm turntable blows very well, damn it, I’m sitting next to me as much as the breeze blows over me 😀 I put the turntable complete from dipkul on the back of the tower, it was packed well

The temperature in games decreased from 75 degrees to 69 degrees when I installed it on the tower cooler from id cooling since it is quieter and does not roar at 1400 rpm compared to the fan from zalmam.

After placing two of them on the front panel, the temperature of the video card dropped dramatically. However, there is a noticeable increase in the computer's level of noise, which is most likely not a flaw but rather a pattern due to the fact that the fans are so powerful.

3 additional coolers of this model were installed in the case, they behave as adequately as possible, both in terms of noise and in terms of cooling, so far one month has passed - the flight is normal. Some pros: Great cooler for a great price (1300 at the time of purchase in February 2022). Quiet but powerful. Its cons: The only drawback is the fastening system itself with screws, which you need to screw in and cut the threads in the cooler yourself by screwing in, this is inconvenient and not

3 additional coolers of this model were installed in the case, they behave as adequately as possible, both in terms of noise and in terms of cooling, so far one month has passed - the flight is normal. Pros below: Great cooler for a great price (1300 at the time of purchase in February 2022). Quiet but powerful. Different cons: The only drawback is the fastening system itself with screws, which you need to screw in and cut the threads in the cooler yourself by screwing in, this is inconvenient…

There is PWM, but the fan runs at 500 rpm and cannot stop. You can't really call it silent. Sufficiently productive, at high speeds it creates good pressure

I bought be quiet! Pure Wings 2 (BL083) for the Noctua NH-U14S cooler is the second number. I fixed it with spare brackets. The mother set 800 rpm.

Compared to the fan from zalmam, it is quiet and does not roar at 1400 rpm, I put it on the tower cooler from id coolling in the middle, the temperature in games dropped from 75* to 69* degrees

The video card became much colder after installing two of these on the front panel. But the computer has become a little noisier, which is more likely not a drawback, but a pattern, because the fans are powerful.

I put mine on the front of the AS500 dipkul tower, and so this 140 mm turntable blows quite well, dammit, I'm sitting next to me as much as the breeze blows over me. Good, non-noisy turntables have a bi quaet; those who disagree have clearly never heard real noisy turntables. I secured the turntable I had ordered from Dipkul atop the tower's rear.

With its pros: + Large adjustment range + Remains very quiet up to 1000 rpm, even silent Some cons: No, except perhaps the price and noise at maximum speed, but still this noise is much quieter than similar models from other manufacturers

Pros: Quiet, high-quality fan, for those who do not need a "Christmas tree". With its cons: Complete silver screws are not very suitable for a black fan in color. But these are quibbles.