Razer DeathAdder Elite - Multi-Color Ergonomic 🖱️ Gaming Mouse for Mac: eSports Gaming Mouse (Renewed) Review

I bought this mouse about six months ago, before that I used mainly raisers (copperhead, lachesis 5600) and a little zowie fk-2. What can I say. Gorgeous mouse courteous that I took it for 2.5k. For half a year has never failed, at all! The exception was that the rubber band on the right of the mouse came off, but this is mostly due to the fact that my grip is too strong and my little finger digs into it. I must say right away that it is not very comfortable to play without this rubber band…

A lot of people swear at Razer because of their build quality. The main reason for the butthurt is that people paid decent amounts of money for the devices, and it did not live up to their expectations (which were initially overstated). For example, cheaper mice from the same A4Tech have exactly the same "random" assembly, but for some reason they are sprayed with poop much less. That's right - I gave a thousand for a mouse, died a year later, put it in a trash can - went for a new one. In…

I used X7 before, the quality of the sensors is worse, but otherwise there is no comparison. It would be better if I bought 4 of these for the money.

Tried it in CS:GO. It shows itself well, the sensor works clearly on a rag (x7) and plastic carpet (branded). On plastic, it’s almost like clockwork, the best option for games. A year later, the legs are not erased In fact, a year later, the mouse is like new, but still not without flaws, they are systemic here, and next. once when buying, I will look not only at Reiser, but also look at other companies

Feels comfortable in the hand and moves smoothly on the mat. Rubberized side skirts for the thumb, pinky and ring fingers allow you to more confidently hold the mouse in your hands.

I am a fan of Razer. I have a blackwidow 2022 keyboard that works and looks like new so far. But in the novelty I was very upset I definitely DO NOT RECOMMEND to buy. Has pros: Material quality pressing force Realizing that you have a Razer Some cons: Build quality outweighs all the pros Side button backlash RMB and LMB are pressed differently Wheel. This is the worst. When I scroll it, periodically something rattles in the mouse, as if a piece of plastic is not fixed inside In general, it…

I have been using it for more than 5 years, I play every day for 5-6 hours. You understand the level of exploitation. For all the time, nothing happened, only the stickers on the bottom of the mouse came off, on which it slides, and then recently, I just tore it off, otherwise the mat was scratched, now I will order new ones and I will use it for another 5 years)

I bought it on jd at a discount for 2900. The box is chewed, but these are complaints against SDEK, the mouse itself is well packaged and did not suffer. I like everything very much, I will not change until the last Has some pros: Excellent sensor, omron clicks, shape, chroma backlight, nothing backlash, and it's a razer Different cons: Price, painting (I have desteny 2 edition and if you raise the buttons you can see that the paint is a little crooked) (but this is not visible)

A mouse with a lot of ambiguity. At this price, you might want to consider another brand, such as Zowie, which is utilized by a significant number of professional gamers. If you are an avid gamer, you should consider this option. Many advantages: Lighting that is both beautiful and designed It's easy to use after you get used to the shape of the mouse, but it takes some getting used to after using another brand. Plenty of additional control buttons Inserts made of rubber on the side The scroll…

I considered my options for a considerable amount of time before settling on this mouse. The shape fit the palm of my hand more naturally than those of other mice. When I put my palm on the mouse, the case flexes and creaks a little bit; consequently, I took it to the service center, where they promptly replaced it with a new one without causing any unnecessary delay. This unwelcome drawback was discovered on the very first day of use. On the new one, there was no such downside, but after a…

I was able to get used to the weight for a few days before making the purchase in November 2022, when it first became available in Hong Kong. After realizing that playing a really busy game causes the player's hand to sweat and the mouse to become slick, I concluded that the rubber bands cannot be used to save progress. Plastic started to work its way into a pal who was riding on the same mouse. 06/05/2022 I became aware that she had completed everything. The wheel started to creak and stutter…

The previous rodent is a Bloody V3M, which was purchased on July 18th, 2017, and it was a copy of deathadder in both appearance and resemblance. As a result, I'm going to contrast these two tools. The DA is larger in length and width, and the majority of its control is accomplished by the use of a full palm grip. Both of the mice are easy for me to use, and I am able to put my fingertips exactly where the designers intended. The plastic on the DA seems to be of lower quality than the plastic on

After having a RazerMicrosoft Habu for ten years, I decided to upgrade to this mouse. First major pet peeve: the square and long sensitivity buttons, as well as the overall length of the mouse (on Habu they were round and shifted forward). The index finger needs to be bent quite far at this point. In addition to this, it is not particularly practical. The buttons have been relocated to the wrist area. Cant number two; on the other hand, the side buttons have been shifted forward, so that you…

Previously used DeathAdder 2022, upgraded to Elite in October 2022, but already in January 2022 I was disappointed, less than half a year later the wheel began to creak. I would like to note that on the 2022 model, which I have been using for 6 years, nothing creaks and does not hang out so far. In general, I want to say that the quality of materials and assembly at Razer has fallen, relative to products 4-6 years ago. And I judge not only by the example of the mouse, I left a review about the…

Different pros: The shape is perfect for my grip. Not dirty plastic. Good sensor and buttons. Easy setup via software. Some cons: Light.(no weights to adjust the weight) I like heavy mice with weights.

Hell of a creak, even when you just put your palm on the mouse. The back bends even with a slight pressure. No luck, in general. If you press the back harder behind the DPI buttons, then you can achieve the operation of the buttons. I recommend to check when buying by clicking on the top. On others (Mamba Chroma, DeathAdder of previous generations) there was no such nonsense =\ The mouse was bought only yesterday, but I doubt that it will be possible to return it under warranty with such…

Very ambiguous mouse. If you're an avid gamer, then at this price, you should look at another brand, such as Zowie, which is used by a large number of professional gamers. Different pros: Design and beautiful lighting Comfortable in the hand, but it takes some getting used to like after any other mouse Lots of extra buttons Rubber inserts on the sides Probably the best mouse wheel I have ever used. Top sensor Excellent braided wire that bends easily It hasn't worn off in a year of use. Has some

I advise you to pay attention to the mice of other brands. In my opinion, this copy is not worth the money. After completely getting breakdowns "accidentally" flew off into the wall. 2 times. Its pros: In terms of filling, Pixart 3389 works out at 146% I did not reveal any breakdowns, lags and other demonism. The shape, although convenient, is still not for everyone, so I advise you to feel it in the store before buying. Has some cons: Quality at the level of bloody, after 11 months of active…

The price from Ali, this is the killer feature of this mouse that overlaps the minuses. For off. 2022 cost you can buy anything without the above drawbacks. The main disadvantage is that it does not save profiles. I'm used to that once I set up the mouse, I forget about this matter and delete the software / driver. Right there, unnecessary software will constantly hang in the tray. Well, completely useless dpi buttons. I understand one button to shove that would switch the profiles recorded in…

The left button is the main one! backlash as it is unknown what creaks and is pressed fuzzy while the right one has an excellent click if not for the quality the assembly of the mouse would be top-end but the main button is complete slag even in China for 400 there is no such thing; I handed over the mouse back to the store When buying, carefully unpack and save all stickers. P. S I ordered another one and voila, the button clicks normally, though the wheel it crackles a little harder…