Header banner
Revain logoHome Page
refill paintball with ease: alomejor cga347 paintball fill station kit logo

Refill Paintball With Ease: Alomejor CGA347 Paintball Fill Station Kit Review

12

·

Average

·

$$$$$$
Revainrating 3 out of 5  
Rating 
3.1
🔫 Paintball, 🏕️ Outdoor Recreation

View on AmazonView on ЯM

Media

(4)
img 1 attached to Refill Paintball With Ease: Alomejor CGA347 Paintball Fill Station Kit
img 2 attached to Refill Paintball With Ease: Alomejor CGA347 Paintball Fill Station Kit
img 3 attached to Refill Paintball With Ease: Alomejor CGA347 Paintball Fill Station Kit
img 4 attached to Refill Paintball With Ease: Alomejor CGA347 Paintball Fill Station Kit

Description of Refill Paintball With Ease: Alomejor CGA347 Paintball Fill Station Kit

SMOOTH DESIGN: This paintball fill station Knob type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long service time. APPLY FOR: Easy to install and use. The paintball charging adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints. 45MM DIAMETER: The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use. UNIQUE DESIGN: 6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank. USED FOT: The paintball charging adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints. Adapter Connector Specification: cga320

Reviews

Global ratings 12
  • 5
    2
  • 4
    2
  • 3
    4
  • 2
    2
  • 1
    2

Type of review

Revainrating 2 out of 5

Does not Properly read Pressure

THis is the second unit we have ordered from this company. The first did not have a drain valve and we got billed 80bucks for a replacement. This second unit the Pressure gauge is off by over 500psi. This makes it extremely dangerous to use for filling PCP equipment. We are a pcp company do not use this unit, it is inaacurate and could result in over filling pcp equipment and creating a hazard. We attempted to video the malfunction at 3010 PSI the rubber stopper blew out striking me in the head

Pros
  • Sports & Outdoors
Cons
  • Certain areas may have regulations on the use of paintball guns, limiting the need for a refill station

Revainrating 4 out of 5

It worked well for a dozen uses. Updated 12/28/2019

UPDATE 12/28: I got the new item sooner than expected and it seems to be working well. Seller was very responsive.UPDATE 11/13: Seller has promised to ship a replacement unit; stay tuned.I got this 2 months ago and it looks great and mounts nicely on my scba tank. BUT after I used it a dozen times to fill my PCP rifle the exhaust valve knob now binds up under pressure and I have to use pliers to release the air in the fill hose. This is a potentially dangerous situation and may prevent me from…

Pros
  • ‎8.8 x 5.7 x 1.4 inches
Cons
  • It may take a long time to refill tanks, making it cumbersome

Revainrating 5 out of 5

Just be sure to make sure all the hose is tight that uses a micro fill station hose

Attached to my 4500 PSI carbon fiber firefighter tank. to fill my PCP airguns works good. I think it has a micro fill hose and it so you don't feel your air kidsgun too fast. And it has a bleed off valve which comes in handy. But the price good deal I've seen them cost higher triple this price but it seems to be working so far.

Pros
  • works but my guage is leaking first week.
Cons
  • Used for 2 months and oil leaked out of gauge, Don’t buy. I am not able to return. 😟

Revainrating 3 out of 5

it works but requires some adjustments to fully seal

Overall it works with some issues. As it comes it does not tighten good with a scba bottle. Seems like there is little extra material once thred is toght 100% still a little loose. I had to squeeze in a washer to put more space and tention against the nut which now works very well. For the price, shouldnt have to make amy adjustments to it. Gets the job done.

Pros
  • ‎Alomejor
Cons
  • The refill process may be noisy and disruptive, making it unsuitable for quiet neighborhoods or indoor use

Revainrating 5 out of 5

Good product best in my review

Works really well. Came with a few extra seals and the things you need to get started. Easy to use. Delivered on time. That's my review.

Pros
  • Dependable
Cons
  • This thing leaks.I’ve tightened it very tight still leaks.

Revainrating 2 out of 5

Hard to make seal, gauge is junk.

Second time of use had to change out o-ring on stem, then at around 4000 psi noticed bubbles appearing in gauge then as I expected it blew the rubber plug and oil out of the gauge.

Pros
  • 45MM DIAMETER: The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use.
Cons
  • The refill station requires an external power source, which may not be available in all situations

Revainrating 1 out of 5

Leaks-no seal to the CGA347 tank valve-DOES NOT FIT CGA347 VALVE! WHEN THEY SAY TIGHT.

THEY MEAN TAKE A LARGE WRENCH AND OVERTIGHTEN IT WHICH WILL DAMAGE THE INSIDE OF THE FEMALE CGA347 ON THE TANK. SO THEN U HAVE A DMAGE VALVE ON A TANK WITH 4500 PSI OF AIR AND U CANT REPACE THE VALVE TILL U DUMP ALL YOUR AIR U JUST PAID FOR. Leaks at the tank connection. Even used a pair of channel locks to try and tighten down-still leaked. For reference lgoogle up images of a cga347 nipple then look at this one-not the same!

Pros
  • Exactly what I needdd
Cons
  • Needs longer hose

Revainrating 3 out of 5

This didn't seal up with my SCBA tank as well as I hoped.

The connection / probe that attaches to the SCBA bottle starts to leak once it gets past 3000psi. I've tried different o-rings and levels of tightness on the connection. Based on my research this is a rather common problem. Some folks have no issues though.

Pros
  • 5 Stars, you can not get any better.
Cons
  • It's a leaky POS. Does not seal to the CGA-347. Leaks at about 1500psi...

Revainrating 3 out of 5

Works but leaks best in my review

The adapter works. But it has to be tightened with a large pair of pliers. Hand tight does not prevent it from leaking. But other than that it works fine.

Pros
  • ‎0.61 Kilograms
Cons
  • The cost of the refill station may be too steep for some individuals

Revainrating 1 out of 5

Leaked air for my opinion

Seems like a good product but Unfortunately it leaked air and had to return it for a full refund they are really good and easy to take back and give you a full refund. Had bad luck with my purchase Item but really good folks to deal with and fast refund if Item is bad .

Pros
  • APPLY FOR: Easy to install and use. The paintball charging adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints.
Cons
  • The refilling process may be dangerous if not performed correctly, posing potential injury risks

Revainrating 4 out of 5

It came in on my review.

A week earlier than the estimated receiving date.Simply, but well packaged.With limited use it does exactly what I bought it to do.Hose is too long and apparently not microbore from the sounds of the amount of air released at the pressure release stage.Gave it a 4 instead of a five because I have used it for a limited amount of time, but there is so little that can go wrong it should be great.

Pros
  • works good
Cons
  • The refilling process can be messy and can stain clothes and furniture

Revainrating 3 out of 5

Works, but finicky needle in gauge (on mine)

Nice setup for filling my pcp gun from scba tank. Rated 3 star because the gauge ALWAYS sticks at 2500psi. I have to tap it to get it to register properly. Luckily I have a pump with a user defined auto pressure shut-off (not that I fully trust that either).Never walk away from a high pressure charging operation. Use common sense. Fill using a rated blast chamber if in doubt of your equipment. Next time I'm at hosepower, I'll pick up a 0-5000 psi industrial hyd gauge that I trust (use their…

Pros
  • Works as stated, good quality
Cons
  • The refill station may take up precious storage space