🌈 Enhance Your Lighting with RGBZONE DC 12V 44 Keys IR Remote Controller for 3528 5050 SMD RGB LED Strip Lights Review

looked like a cool new miniature version of the standard 12V RGB light controller and did for a few weeks but now the blue channel doesn't turn off even when I press the off button . Bad transistor or something. cheap parts.

I bought 4 of these and all 4 have the same problem, blue and green are reversed and it is affecting other color combos selected on the remote as well. The only color that always works is red. This is not a wiring issue as you can see in the attached image. All wires are connected to the right place on the light strip.

I couldn't get the controller to use custom color; All color buttons work, flashing modes work, dimming works - but I couldn't set custom values for red, green, or blue. The range is good in my opinion and I like the overall location. If I could choose my own color I would give 5 stars.

Works great. I use it to illuminate part of my pond. I put it in a plastic bag and sealed it. I can get a radius of about ten meters with the remote, which works well. It's been two weeks, rain, mud, every nine meters. There is no moisture in the bag, but it has survived fairly low temperatures and has not bothered her.

I replaced my existing controller with this slimmer controller and antenna and am very happy with it. Works well and from a pretty decent distance. The remote control that came with my LED string had a large clunky receiver box with poor reception and didn't last more than a couple of months (using this jump jack tent trailer). This worked much better and was very reliable. I would definitely recommend it!

This controller is surprisingly small. The remote control is similar to many others you'll find for LED controllers, but the controller itself is a lot smaller than I expected. It would be great for a portable project. I plugged it in and it started with no problems. The only thing I would like to warn the buyer about is that there are no screw holes so you will need other mounting methods. It's very light so you don't need much. A 1/2 x 1/2 inch square Velcro works well.

1 controller works great. 1 works 90%, the green signal is very weak, I tried different light strips and checked the strips on a working controller, I found that the problem is with the controller. 1 controller doesn't work at all, doesn't even turn the strip on/off, which I checked again on a working controller. None of these will work for homemade flowers. Overall still very satisfied for the price and size. Faint green would be fine for my purposes and would make 1 replace a completely…