RockShox Reba 2009-2011 Service 🔧 Kit for DualAir and Motion Control Review

later It was a great kit, the components were clearly labeled in separate ziplock bags and it contained everything you needed except oil and grease and it came with a tapered teflon washer with a Hole in it the middle that I couldn't identify in any of the RockShox repair manuals for RockShox models? Now my 6 year old Reba 29er is like new!

This kit contains everything you need to service your Reba motion control system and dual airbags. Everything is well packaged separately so you don't mix things up. Make sure your new o-rings match the ones you remove from your replacement fork. The kit will take some time to install. So be patient, lube the rings before and after installation and you should be fine. The kit did not include a retaining ring for the Poploc compression button. I broke mine removing mine and had to run to ACE to…

This is actually an official RockShox part number: 11.4015.320.000 (2009-2011 Reba Service Kit (DualAir/MotionControl)) all previous and current models). There you will find all the drawings and details. I would also recommend a dust seal kit and you may also need an installation tool for that (if you don't already have one): RockShox 32mm Tora/2009-Current Reba /Recon/Revelation/2009-Current SID Dust Seal/ RockShox dust/oil seal foam ring kit -Installation Tool (32mm) (Note that RockShox…

I had a 2010 Rockshox Reba XX fork that I needed to rebuild and this kit is MORE than anything else to do the job. NOT included in this kit are the dust seals and foam rings you see just below the posts. For most fork services, you only need this other kit. If you want to disassemble the fork and replace everything else, get this kit. This kit included Schrader valve cores, Schrader valve caps, all the o-rings and washers I needed, basically everything except the oil! Some forks don't use the…