💡 Get a Brilliant Glow with Sea Gull Lighting 7543502-962 Two Light Ceiling Flush Mount in Brushed Nickel Review

Installed, nice and bright. The glass dome is held in place by one of the spring-loaded latches; You pull it out to install/remove the dome. As long as the spring-loaded clip holds, you're good to go. The crossbar/mounting bar should be 1/2" or 1" longer at each end. I installed over a standard cutout box and the mounting bar was too short to fit through the cutout hole. I improvised by putting a piece of strapping/galvanized steel across one side of the cutout and sliding a crossbar over it.

A central fixing nut is not sufficient to secure the outer edges to the ceiling, especially given the weight of the glass. I had to drill three holes next to each glass clip and stick a drywall anchor into the ceiling. All is well now, 3 dimmable 75w leds and this light can illuminate any room to the right level with a dimmer. Whether lows or HD, all they have are downlights with integrated LEDs. They are rarely bright enough and if an LED fails, the lamp has to be removed. To speak of planned…

Today I installed two of these - one in the kitchen and one in the hallway - to replace some very old fixtures that were here when I moved in last month. You changed the world. They are very simple and exactly what I wanted. Installation was very easy after removing the screws for installing the metal plates. 🤬 Why aren't screws included? None of the ancient jigs had plates or screws to hold them in place. It's outrageous how companies save a penny at the expense of customer satisfaction. Now…