🔧 SHURFLO (94-236-08) Head Assembly: Efficient and Reliable Pump Component Review

This kit includes the entire pump assembly (except motor and motor mount). Used this to fix the water pump on my 2007 Jayco trailer. After 14 years of flawless operation, I could hear the engine turning but no water pumping. I found my problem was the glass filled plastic frame which was damaged (perhaps due to cold temperatures) but it seemed safer to replace the entire front pump assembly which is attached to the motor with only 3 bolts rather than risking a leak due to - for a 14 year old…

Poor quality control. The product was purchased at the end of August in order to have it "at hand" for the operation of the greenhouse. In December they were removed from storage and installed. It could not generate pressure because it was leaking at the junction of the pump housing with the mounting assembly. The bolts connecting the pump housing to the mounting assembly have not been tightened. Once these bolts are tightened, the pump will not be pressurized reliably/continuously. When it…

The pump head on my old pump had frozen and the housing was cracked. This is easy to install and is attached to the pump motor with 3 mounting screws. A small wrench for the hose fittings and a #2 Phillips screwdriver are all you need to replace the pump. Total time was less than 10 minutes. Simply disconnect the piping, disconnect the 2 wires connecting to the pressure switch on the back of the housing and unscrew the 3 screws holding it to the motor housing. Attach the screws, tubing, and two