Heavy Duty Float Switch for Sewage, Suspended Solids and Viscous Liquids - The Ultimate SludgeBoss Review

Works as expected. I needed closed contacts when the float floats. It also has contacts for hanging the float (I didn't use this feature).

It is too large for most above ground basement systems which would require 3 of these units. However, if you have a tank that doesn't take 10th place, then this is your high-performance swimmer.

I connected the red and black wires to the high water alarm and plugged in the blue wire. It seems to work great for high water alarms in my septic system. Time will tell but the quality looks very decent.

Don't waste your money on cheap float switches, my last cheap one screwed up the $250 pump, there was water in the switch and the pump ran next This burned lead pump, don't measure once, cut twice

One device raises and lowers, so only one device needs to be transported on the service trolley. It takes more than regular weights when not tied to a tube, but once we've placed one of those, they'll last forever. They have NO plug and play connections - just bare wires - but they are perfect for gray and clean water.

Floats great. Good build quality. I replaced one of my old floats with this one and can say it is of a higher standard. The instructions are clear and can be linked to a trigger for filling or emptying. Very happy with this product. Used on household chopper 220V 1HP.

The description omits the fact that it has three wires instead of two as I expected. That was excellent. This means you can use it for different applications. In my case the switch needs to open when the water level goes down. This signaled to the pump controller that it was time to turn off the pump. You just have to use the correct two wires and it has been determined in the directions that came with the float. If you use a different combination of wires, you can also use the same float to…