🏠 Efficient Furnace Room Air Blower for Suburban Homes Review

. Clean and balanced and I bent the original a bit when pulling it off the shaft. Repairs made easier. Worth the extra cost to get the job done right.

After I disassembled the RV heater and removed all the dust, the original plastic fan self-destructed due to a crack and deeply embedded dust knocked it out of balance. I was glad to see this all metal. Very strong and runs like a champion. Since then I do not have problems anymore.

My neighbor has a 4 year old RV and his heater was not working. I opened it and the plastic fan was destroyed. PN 350206. We chose this metal fan 350129 and it fitted perfectly. There was no indication why the old plastic blades were lying around.

combustion fan installed, new motor and this fan. Assembled and installed, vibrated heavily. New engine disassembled and tested and then only the combustion fan is ok, the fan was defective when revving up, the old one was cleaned and worked perfectly. The old combustion fan failed, I ordered everything because I wanted all the parts and just wanted to do it once. The old one had an SAE hex head bolt, the new one has a metric hex head and was unbalanced.

My camper van's fan rotor was plastic and although it was only 6 months old the rotor was broken. I wanted to replace it with the same plastic rotor but I found this one. I wasn't sure if it was a direct replacement but knew I could return it if it wasn't. It fits perfectly, runs quietly and, as far as I can tell, moves just as much air as the old one. Making it out of steel instead of plastic is a much better long-term solution.