🛢️ MOTOKU Gas Fuel Valve Switch Petcock: XR200R, XR250, XR350R, XR400, XR500R, XR600R, XR650R - Rancher 350 400, Recon 250, TRX250EX, TRX250X ATV Review

This is a quality part. My 1983 XR-200R requires a 3/16" fuel line. However, the fuel line required for this fuel valve is 1/4". Extremely awkward and should be mentioned in the product description.

The fuel line outlet was larger than the fuel line. A little lubrication and effort just made it slide. It also leaked fuel and had to be lined with extra shims for better sealing.

Fairly good quality. The valve is a bit stiff, but it's brand new so I'm not surprised. I like the fact that this one comes with a small grip as the plastic grip is long gone on my Scout.

It doesn't seem to rotate smoothly compared to the stock exhaust and the outlet is too big for my xr250r and I don't like the idea of forcing a small fuel line on it. only for the line to eventually separate. The description said it fits my bike

Petcock is perfect for the XR600 but the sealing bag was missing the o-ring at the bottom of the filter. As can be seen from the photos I'm disappointed and will have to use an old o-ring - hopefully it doesn't leak.

Used on '86 Honda XR200R -- Bolts only fit in rear side holes, spacers do not allow access. A screw hole was still covered in metal and had to be dug out. The actual petrol outlet for the petrol line to the carburetor was too large. I ended up repairing the old faucet with new screws and gaskets.

It doesn't seem to spin smoothly compared to the original and the exhaust is too big for my xr250r and I don't like the idea of forcing a small fuel line on it just to split a line in eventually to have In the description it was said that it fits my bike

mishandled. The spacers didn't fit the holes in the machine, I had to use the original spacers. The screen looked as expected. The bolts were not the same as Honda's. The faucet works well but looks a bit cheap.

Fits my old 2001 400xr perfectly. It was easy to install and didn't take long. However, the product came without a sieve. This is clearly part of the package in the product description. Now you have to buy separately. Very frustrating.

Used on '86 Honda XR200R -- Bolts only fit in rear side holes, gaskets do not allow access. A screw hole was still covered in metal and had to be dug out. The actual petrol outlet for the petrol line to the carburetor was too large. I ended up repairing the old faucet with new screws and gaskets.