🔌 T-Spec Battery Terminal: 8-Position Connector for 1/0-10 AWG Wires Review

Sunken battery. Use a 90 degree hex wrench or a shorter drill head with a narrow wrench. there is space Also suitable for ring cable lugs. many options.

I like it because it can move the rod to the left or right side of the block. You can adjust the post up or down. it is a heavy solid block. I used it on my 2022 4runner.

1 that's great. 2 you need a 5 star key tool. It is solidly made and has good workmanship. You need to make sure you can stretch the wire tight enough. For appearance (good) practicality (50%).

Looks good and definitely does the job but it caused some battery corrosion just because of the material difference and it's extremely inconvenient that they've decided to use Torx for all fasteners to use

The only problem I had was that the spacer provided was too thin to clamp to the negative battery terminal. I broke off the torx head, had to drill it out and look for a new torx screw. Then I got a lead clamp/plug, now it works fine

Very disappointed! Wanted to add more accessories to my suburb but found I couldn't install the terminals. I deliberately chose this terminal because I could connect the car's main cables to the product terminal. Try after 30 minutes. The battery clamp cannot be mounted on batteries with a countersunk pole. May work well for others just not this type of battery. The product information should state this.