Description of Tymate RP05 Repeater
🚗Function - The Tymate repeater is used to enhance the sensor signal forward to the display, in the situation that length or electronic interference prevents your monitor from receiving sensor signals. 🚙Compatibility - Tymate repeater has 433.92 MHz working frequency. The signal booster will ONLY match to Tymate TPMS Tire Pressure Monitoring System. With repeater, it increases the signal from transmitters to the TPMS monitor which the distance is over 36 ft. 🚌Parameter - The signal booster is water and dust resistant, suitable for any weather. It can stand for -40°C ~ 80°C at work and -40°C ~ 85°C in storage. 🚕Installation - It's small and easy to install, which is suggested to install at the rear axle.Most RV they will have a place for the battery tank,the signal booster can be installed in the battery tank, so the booster power lines can direct connect with the battery. 🚚 Working Mode - When the repeater is on, the red LED on the repeater will be on. If received sensor signal, the red LED will flash twice.