Universal Light Signal Flexible Motorcycle Review

This is exactly what I needed and works just like it does. The only thing I would like is directions. I learned how to connect it from a photo on Amazon.

For less than $10 these lamps work great. It took me a few minutes to figure out the schematic, but that's it. bright. Installed on my BMW motorcycle and you can barely see the device until I break it, super bright lights

Purchased as an extra brake light for a motorcycle. I wasn't attached to the signals, just the brake. I have found that in order for the brake light to work, you must also use the wires as a running light. There is no big problem. Adds more light to the rear of the bike and is brighter than my bike lights.

Worked great for a week, then nothing. I've checked the wiring harness and it's getting the correct voltage for each setting (work/brakes/left/right/danger) but no longer lights. It could just be a broken ground wire somewhere along the lighting wire as they use a really VERY thin wire and I attached it to the box by gluing the wire inside and out through the hole on the bottom to the connector. Maybe the wire is bad, maybe the block is bad, I don't know yet.

Product arrived, delivered quickly and in good condition. It took me a minute to figure out the wiring color code as each manufacturer uses a different color coding scheme, I'll be universal: black is ground, white is drive lights, all red LEDs are on; The red wire is the brake light, all red LEDs are on. Green is the amber turn signal on the side where the wire harness exits; Yellow - Yellow blinker for 8 yellow LEDs on the "far" side. When the brake light and turn signal are on, both are on…