💧 Valterra T1001-9VP Bladex Waste Valve Seals - 1.5" - Efficient Replacement Seals for Superior Waste Valve Performance Review

We have a 2014 26 foot Jayco Jayflight Swift. I've read that newer models require T1001-9VP seals, not 7VP. These seals worked. We knew it was gray water because it didn't smell like black water. The main outlet where you connect the drain hose was slowly leaking, not the valve itself. I removed four bolts and measured the rings, they were 1.5 inches. It was very easy to swap out and the screws were a bit oxidized so it was great that this kit included the screws.

The new gaskets seemed too thick to screw the old valve fully onto the flanges. To keep the valve working I had to unscrew the flanges until there was a large gap between the flanges and the valve. So I bought a new valve and it bolted tightly onto the existing flanges and still worked. I recommend not buying new gaskets , but to buy a new one instead of the valve. A new valve costs only $7 more. Don't save like me. That costs more in the long run. Also, the new valves were a lot easier to…

I had a pair of Valterra 6001 valves on the drain pump outlets and one of them was leaking. I originally planned to get an internal valve assembly and replace it, but these days they were hard to find. The manufacturer states that these seals are a necessary replacement when only the seals (rather than the O-ring along the steel stem of the valve handle) are defective. It was easy for me to swap them out as I had access to remove and work on the entire valve. Other reviews say that if you need…