💻 VIVO Black Fully Adjustable 13 to 32 inch Single Computer Monitor and Laptop Desk Mount Combo: A Comprehensive Review Review

I wanted something that would allow me to sit in my leather chair and use a second monitor with my laptop. The kit includes both a clamp and a socket. I have this little table that I also bought from Revain. At first I pushed myself against the edge, but that would have knocked the table over. I then drilled a 3/8" hole in the center and used a socket. Works great, easy to set up. My only complaint is that the laptop tray has raised edges on either side that get in the way of the ports and feel

Just assembled it to see if it works. It does! The product name is misleading - it works with a 34-inch ultra-wide. I am using a 34 inch Samsung SJ55W Ultrawide and a 15 inch Dell XPS (2021 version). I assume it will work with any 15 inch laptop. That works great. I used the grommet installation option. There are pads to prevent damage to the furniture. Depending on how your hub is positioned, it may take a few twists to fit perfectly, but luckily that wasn't an issue on my desk. Next step…

This is a really solid stand, I have a huge monitor and a 17 inch laptop and it holds both well. The laptop stand is short and has no curve, I struggled to get the laptop in the right position next to the monitor. I contacted the manufacturer and the customer service was amazing. They send me another hand from one of their models for a small fee. They responded very quickly and were very helpful. If you also have a huge laptop and/or monitor they can be placed side by side with this…

Very satisfied overall. Installation time, including going down to the basement to get the washing machines and figuring out where to put the stand, was about 51 minutes. I have a 16" Macbook Pro and a 32" monitor. It shakes a bit when I hit the table, but that's probably true of all coasters. Don't notice any trouble while typing. They include most of the hex wrenches you need, but you'll need 8mm to adjust the axle that the Vesa mount attaches to. Tighten it before placing a 32 inch monitor…

Now that working from home is my new normal, I've decided to invest in an optimal setup. I had a freestanding single monitor mount from Vivo and switching to it made more sense than just buying an extra mount and laptop holder. The whole setup was pretty easy; It took a little longer to get the monitor and computer exactly where I wanted. 2 of my criticisms are minor. First, I would like the post to be about 3-4 inches taller. I know they sell a higher one, but it's way higher than I need…

I bought this item to attach my monitor and laptop to the same clip. While I like the build quality, I don't think the description accurately reflects the item. At least not the product I received. The description says it can hold up to a 32 inch monitor with a laptop. Not correct. It's not comfortable at all. It advertises that the monitor rotates. Not correct. Unless, of course, I'm constantly removing the mount attached to my monitor, rearranging it, and then reattaching it to my arm. Even…

In my shopping cart for a long time. I finally pulled the trigger and I'm glad I did! I use this mount with my 24" Benq Zowie RL2455S monitor and a 15" HP Beats Edition laptop. Both whites are large and heavy compared to more modern laptops and monitors. Both done with no problems. Installation was easy, only problem was I mixed up the laptop and monitor mounts. You can put any hand on either side, I just shuffled them the way I wanted. For those assembling it, the short arm is for the monitor…

Received the stand yesterday and set it up right away. It took me about 30 minutes to assemble, but mostly because I didn't pull the table out of the wall. It took me another 30 minutes to set it up and tweak it to my liking and work with all the cables, but again due to my specific setup. Overall I am very happy with the stand. It achieved my goal of reclaiming desk space for a very reasonable price. PROS: - Inexpensive (cost NOT quality) - Easy assembly - Very durable - Wide range of…

The people who complained about this thing in the reviews obviously never worked with a wrench! Actually it's amazing. I installed it on my NavePoint Server Rack where my monitoring server resides. I'm very happy with the stability of the mount, but my solid all-metal mounting point makes for an extremely tight fit. If you have a plastic, glass, or thin wood table, you might want to consider other alternatives than the clamp mount, but think Remember that this mount also has a bracket if you'd…