💻 WALI GSDM003S Premium Triple LCD Monitor Desk Mount - Adjustable Gas Spring Stand for Displays up to 30 Inches, 15.4lbs Weight Capacity, Triple Arm - Gray Review

I have three relatively new lightweight 20" monitors. Each weighs less than 10 pounds. Although they are quite sturdy as other reviews have noted, there is some play at either end The center is perfectly straight and even (yes I checked with actual level) Both the left and right monitors are flush with the center monitor and sag a little left and right, so you have to tilt your head to see them. When you align them, there is a pretty noticeable gap between the bottom of the center monitor and…

Honestly a great stand. Be careful with the table you are mounting on. I have a fairly thick desk so the C-clip wouldn't fit and the straight bolt mount would interfere with the keyboard tray sliding (not the product's fault). I've always been an idiot and wanted to install it quickly, so I actually bolted it right to my desk through a bracket designed to hold the clamp assembly. in the end it turned out great! holds all three of my monitors with a barely perceptible creaking of protest. Arms…

It was worth every penny. I was worried that I wouldn't be able to get the right angle for my 2 external 24" monitors, but this worked perfectly! My center monitor is a 27" ASUS MG278Q and the side monitors are 24" AOC C24G1 curved monitors. There is enough to expand to achieve a 90 degree angle for my setup if needed. By eliminating monitor stands, a lot of space was freed up. And he holds the monitors. It takes a few patients to adjust, but you'll love them.

are still five stars. If you're using it as a workbench, feel free to place them however you like, and being perfect and aligned is probably not a priority. Three monitors of the same size (24 inches), Vioteks, all three, all the same equipment, all the SAME! However, as another said, it's an OCD, not a brace. The levers are adjustable and move easily, almost hydraulically. The cables are hidden, but if they're long or the computer isn't close enough, you might need a longer one. There was a…

Although the description states that this triple monitor mount is suitable for a 27" monitor, there is a caveat to the actual installation of a monitor of this size. To install THREE 27" (Dell P2715Q) monitors, the monitors must first be positioned exactly across the width of the bracket. As a result, the monitors cannot be tilted sideways inwards as usual. Second, depending on the aperture of your monitor, you may not even be able to install all THREE monitors. In order for this mount to work…

I was building a standing L shaped table and wanted my monitors to be attached to the main table and all 3 lifted together so I needed a three arm mount which I could attach table. This mount does just that and is particularly good bang for the buck. I've used it to mount my 3x 27" LG monitors and it works well, doesn't wobble/move or fall off. However, this mount barely fits the next three 27-inch monitors. to each other, but for my location it's almost perfect. If your 27-inch monitor has a…

I have three relatively new lightweight 20" monitors. Each weighs less than 10 pounds. While quite sturdy as other reviews have noted, it states both ends quite a bit of play.The center is perfectly straight and even (yes I checked with the actual plane.) Both the left and right monitors are flush with the center monitor and hang slightly to the left and right so you can am Tilt your head at the end to see them. When you line them up, there's a pretty noticeable gap between the bottom of the…

I looked at the reviews and saw that people have issues with this. I had no problems at all. Guys, tighten the screws! Cable management system = 10 out of 10. Assembly instructions / simplicity 10 out of 10. Delivery quality too basic = 9 out of 10. Some parts were rough. so nobody sees it. mehCurrent quality. I would order another one if I needed one. To be honest I have no real complaints about this mount. I followed the pictures and have 3 27 inch Dell monitors. I had to tighten a lot but…

I was building a standing L shaped table and wanted to attach my monitors to the main table and lift all 3 together so I needed a three arm bracket to mount to the table. This mount does just that and is particularly good bang for the buck. I've used it to mount my 3 x 27" LG monitors and it works well, doesn't wobble, move or fall. However, this mount barely fits three 27-inch monitors. "Monitors are side by side, but for my location it's almost perfect. If you have a large bezel on your 27"…

I bought this along with three 24 inch Specter monitors a few weeks ago so my experience is based on that. A person with different size monitors may have a different experience. I was impressed with the ease of assembly. First you decide how you want to attach the stand, because there are two options: a clamp or an eyelet. I went with the clamp and had no problems. It's fairly durable and holds monitors well. Second, the splitters are a single piece that fits directly onto the main shaft and…