Walker 36130 Hardware Flange Repair Review

I fitted the flange but needed longer bolts or used two C clamps to pull the split flange closer. After that he was fine. a lot of money, and it took less than an hour to fix the rusted Walker flange.

With this and two additional screws you can both attach that silly muffler to the mid pipe split point that many G35 owners struggle with. No need to look for a muffler store. It remains only to grind down the old rusty flange and tape it with silencer tape, and back to the smooth, quiet G35!

that fits 2.5" tubing very securely. The screw holes are not perfectly aligned as you can see in the photo, you will probably need to drill larger holes to get the screws in. This only seems to work if part of the original flange is still there. I don't see how that alone can provide a seal?

To repair my 2003 Infiniti G35 exhaust. A known problem with the car, the exhaust pipe flange was corroding just before the muffler. With an o-ring and two sets of these flanges, I was able to fix my muffler for less than $60. The dealer wanted to replace the entire system for 1200. Note: removing the old flange was not easy. Needed an air chisel.

I used this kit along with the 36131 Flange Repair Kit to fit a downpipe and catalytic converter on my wife's Honda Pilot. must be. The drain pipe flange had rusted through and instead of removing the pipes, cutting off the old flanges and welding the pipe together I settled on them. They had enough clearance to reach over the existing flanges. The bolts weren't long enough so I used 3 1/2" bolts with the same thread pitch and a set of washers and nuts to hold them together. Works like a charm…