🔧 Warner 3-inch Full Flex Putty Knife with ProGrip Handle, Model 90133 Review

Nice strong knife but I left it in the bathroom for a day and it started to rust. Just keep it clean and away from moisture and you will be happy with it.

I use 3D printing for my needs. Must have tools to remove all stuff from bed! Not the tip but the side edges are tapered but not too sharp which is ideal for removing excess material stuck to the build surface without damaging the base.

I use this putty knife as often, if not more than my 5-in-1 tool. I use it to fill holes in drywall, gouge gouges in wood, scrape dried burrs and uneven paint, remove peeling paint and old grout. I remove fresh paint defects by wrapping the tip tightly with a damp, soft cloth (a rag from a T-shirt). I can cleanly cut tape by holding the edge of the tape firmly to the surface. I'm sure I've forgotten some of my favorite apps. I used to use my 5 in 1 for most of these things, but these days I…

Professional painter. We use this knife regularly to apply glitter. It's also handy to use a damp, two-ply, 100% cotton cloth to draw clean lines along the door and window frames. On the first day we prep the walls and ceiling, putty the edges of the finish and let it dry overnight, then after painting the ceiling and sanding/priming the spots we vacuum the room and carefully apply 2 coats of quality finish paint on just the edges and let it dry overnight. It is important to apply at least 1/8…