Enhance Your Motorcycle or ATV Performance with WEIYINGSI Sprocket Front 428-17T 17mm: Ideal for Dirt Bikes too Review

I bought this for RPS Hawk 250 and it does not fit. The center hole is too small to fit in the gearbox output shaft. I believe they are referring to the Honda Hawk when describing the package.

For the price it did exactly what I wanted it to do. I put it on a Chinese 2020 Apollo db-14 125cc pit bike. I don't know why they are so underperforming but if you ask me this is a must have upgrade. Shifting from 14 t to 17 t is basically the same as starting off in 2nd gear and shifting into 5th gear. Definitely recommend.

Overall it was perfect for what I needed! I bought this for a 2019 Boom Vader Gen 2 bike as I wanted lower RPM at cruising speed and it helped without changing the chain. Obviously this is a cheap sprocket and it was obvious the edges weren't that smooth but for the price I can't complain at all!

Top speed of the bike has gone up by an insane amount - riding around town doesn't seem like a struggle anymore - I can easily get 50-55 at 3,000rpm / min. Not bad for a small 125 Grom clone. Would recommend to anyone who has these types of bikes - BUT I would suggest replacing the carb with a Mikuni VM22 or similar before changing the sprocket to ensure you have enough power to handle the change.

The quality of this 17 sprocket is rather poor. The machining is very rough and the teeth are terrible. If you have a decent quality chain, this sprocket will eat it up and shorten its life. However, the mechanism works. These gears likely failed quality controls and were sold to a reseller primarily for scrap metal. But like I said it works, it's cheap and the shipping was fast.

I used this 17 tooth sprocket on my SSR Razkul clone. The sprocket came with a knocked out bolt hole. I chose not to return it due to return issues and it is still installed on the bike and working perfectly. I recently had part of a broken link in my chain and am not sure if this sprocket contributed to it. For those considering purchasing a larger sprocket. The upgrade gave me a bit more top gear and longer gears, sacrificing engine braking and low torque. Think carefully. I recommend…

This thing is mounted on a bike. Well I suppose it spins fast because the chain is around this and the other sprocket and the other sprocket is attached to the wheel and the tire is on the wheel and the tire is on the road and the bike is really going! I really can't see as there is a cover that goes over where the sprocket bolts on. Got this for a Vader 125cc Grom clone base from reviews and comments here and there. It was easy to install. The bolts that came with it were awful and snapped…