🔧 Performance Cost Effective Pre-Lubricated XiKe Bearing 20X42X12mm Review

I used these for the idler wheels on a 93 inch Caroni mower. The seller asked $13 for each of the two bearings used in the same pulley. I removed the seal on one of the new bearings and there was grease in it. The fit seemed fine, but I didn't "mic" anything, it just felt like it. It's a pretty heavy burden for these little camps and if I live in them for 5 years I'd say they're worth it. , I now only have about 2 hours left (21.05).

I bought these to replace the cheap bearings that come with my existing barn door roller fittings (rollers that hang from the track). Our door is large and heavy and the existing rollers regularly failed, first the bearings and then the roller itself completely as it failed where the bearing failed. After installation, the videos worked perfectly. No noise, good smoothness, and apparently none of the wear issues we've previously had with previous cheap roller bearings. I would highly recommend…

Unfortunately I didn't read the full description carefully enough. I thought the 8mm size was the shaft hole. It's not - it's the thickness of the bearing. Shaft bore 10 mm. Guilty. I put them in a storage box for the next project. I'm sure everything will be fine. They are packed in their own plastic bag and packed in an overall carton. We packed. The ones I tested rotated with reasonable resistance. These are not spinner bearings so they don't spin as freely. I would call them standard…