🔧 XiKe 6001 2RS 12x28x8mm Pre-Lubricated High-Performance Ball Bearing Review

They are manufactured with decent accuracy. actually had the right amount of lube. good price. So what's the downside? Vaseline grease with a room temperature dropping point will drain at operating temperature. One of them was dirty and needed cleaning and relubrication. Worst of all, there is no groove on the inner ring, so the lip of the inner seal doesn't hold the elements. not for harsh conditions. won't last long unless you want to clean and oil them frequently. Recommended only for…

The thrust bearing on my bandsaw's lower jaws was snarling so it was time to replace it. The bearing screamed after being cut when pressure was applied to it. The bearing had a number on it so I didn't have to go to the saw manufacturer who charged more than the cost of the bearing itself. Revane had less with Prime. I chose this one because the plastic bearing caps can be pulled out to wash and lubricate the reels, unlike the ones that have metal pressed into the caps. These bearings are not…

The last few times I've used my rigid random orbit sander I've noticed more extra vibration than usual. The last time I used it I couldn't even hold the grinder on the board without feeling like it was about to splinter. I took the grinder apart and found that the bearing was completely seized. I removed the bearing and went to my local parts store hoping they had a replacement. Unfortunately not so I went to Revain and found this set of 2 at a great price and good reviews. After getting the…