🔋 YCIND Battery Alligator Clips Clamp with Fuse - Heavy Duty Boost Cable for 12V/24V Batteries - 30A, 12AWG Cord, 3Ft Length Review

Just what I wanted to power my 12 volt jack from a car battery while the engine is running. Concerned that the 12 volt plug that came with the plug could set my car or boat's 12 volt outlet on fire.

I was surprised by the quality for the price. The cables are larger and stronger than other clamp sets I own. Very important. Hardly anything can go wrong with this tool. Use it for your health. Highly recommended.

I ordered a Chinese made tire air compressor Battery terminals and cables that came with the compressor were useless sticky and light, ordered them and they turned out to be strong clamps and the wire was heavy duty Highly recommend this product

Agree with Todd Corey. "12 gauge is rated for 20 amps, 10 gauge is rated for 30 amps. A 30 amp fuse on a 12 gauge fuse is a fire hazard! How do you deal with this discrepancy? This question should be addressed to the manufacturer. Yes, there is a risk of fire. I've already switched to 20 amps. Many Thanks.

Caliber. This one has a much thicker 12 gauge wire. I used this with a 300w inverter. I got it to 250W by drawing about 25A DC on the battery side and running it for 10 minutes. The wire read 39 degrees C / 101 degrees F. An 18 gauge wire wouldn't work. Very happy to find it!

Attach alligator clips to your car's battery. Connect the other end to the inverter. Plug a power strip or two into inverter outlets and as soon as you start your car, you've just created a backup generator that runs all night without refueling. Also, most cars are quieter than most generators. All you have to do is dump your vehicle's exhaust fumes outside of your garage. I use an adapter, clamps and flexible stainless steel hose. Works great. Note: If your inverter is not a pure sine wave…

OK but I doubt durability. Advantages: - Clamps hold tight. The spring is strong enough and the tooth design is holding up well. - The clips are designed to avoid accidental short circuits and they handle it well. too smooth, preventing the fork from slipping. Disadvantages: - Clamping contacts are made of steel with a copper coating (they are magnetic). Eventually they will rust because every time you clamp them to the battery they leave acid residue - The dust cap of the socket does not stay…